PS9711

Maximum Forward Diode Voltage :
Maximum Reverse Diode Voltage :
Maximum Input Diode Current :
Maximum Power Dissipation :
Maximum Operating Temperature :
Minimum Operating Temperature :
Package / Case :
Current Transfer Ratio :
Packaging : Tube
Maximum Baud Rate : 10 MBps


Features:

• High common mode transient immunity (CM_H, CM_L = ±10 kV/ ms TYP.)
• Small package (5-pin SOP)
• High-speed response (t_PHL = 30 ns, t_PLH = 35 ns TYP.)
• Pulse width distortion (|t_PHL t_PLH| = 7 ns TYP.)
• Totem-pole output (No pull-up resistor required)
• Ordering number of taping product: PS9711-E3, E4: 900 pcs/reel,
PS9711-F3, F4 (Recommended): 3 500 pcs/reel




Application

• Computer and peripheral manufactures
• Measurement equipment
• PDP




Pinout






Specifications

PARAMETERS		SYMBOLS	RATINGS	UNITS
Diode	Forward Current	IF	30	mA
	Reverse Voltage	VR	3.0	V
Detector	Reverse Voltage	VCC	7	V
	Output Voltage	VO	7	V
	High Level Output Current *1	IOH	-5	mA
	Low Level Output Current *1	IOL	13	mA
	Power Dissipation	PC	130	mW
Isolation Voltage*2		BV	2500	Vr.m.s.
Operating Ambient Temperature		TA	−40 to +85
Storage Temperature		Tstg	−55 to +125

*1 T_A = -40 to +85
*2 AC voltage for 1 minute at T_A = 25, RH = 60 % between input and output.




Description

The PS9711 is an optically coupled high-speed, totem-pole output isolator containing a GaAlAs LED on light emitting diode (input) and a photodiode and a signal processing circuit on light receiving side (output side) on one chip.

The PS9711 is a kind of photocoupler which is optically high-speed and has totem-pole output. It can be used for high noice reduction,computer and peripheral manufactures,measurement equipment and PDP. It is available in the SOP package which is 5-pin.

There are some PS9711 features as follows. (1) high common mode transient immunity; (2) small package; (3) high-speed response; (4) pulse width distortion; (5) totem-pole output; (6): ordering number of taping product.

what comes next is some information about PS9711's absolute maximum ratings when TA is 25 . (1): forward current (IF) is 30 mA; (2): reverse voltage (VR) is 3.0 V; (3): supply voltage (VCC) is 7 V; (4): output voltage (VO) is 7 V; (5): high level output current (IOH) is -5 mA; (6): low level output current (IOL) is 13 mA; (6): power dissipation (PC) is 130 mW; (7): operating ambient temperature (TA) is from -40 to 85 ; (8): storage temperature (Tstg) ranges from -55 to 125 . Then is about elecrtical charaters when TA is from -40 to 85 . (1): the typical forward voltage is 1.65 V and the minimum is 1.4 V and is 1.9 for the maximum at the condion of IF is 10 mA and TA is 25 ; (2): the maximum reverse current is 10 A at VR is 3 V and TA is 25 ; (3): 30 pF terminal capaticance is its typical value when f is 1 MHz and TA is 25 ; (4): the typical high level supply current (ICCH) is 11 mA and the maximum is 17 mA at VCC is 5.5 V and IF is 10 mA; (5): the typical low level supply current (ICCL) is 12 mA and is 18 mA for the maximum value when VCC is 5.5 V , VO is GND and IF is 0 mA.