PS9614

Maximum Forward Diode Voltage :
Maximum Reverse Diode Voltage :
Maximum Input Diode Current :
Maximum Power Dissipation :
Maximum Operating Temperature :
Minimum Operating Temperature :
Package / Case :
Current Transfer Ratio :
Packaging : Tube
Maximum Baud Rate : 10 MBps


Features:

• HIGH COMMON MODE TRANSIENT IMMUNITY:
  CM_R, CM_L: ± 20 kV/µs TYP
• HIGH SPEED RESPONSE:
  10 Mbps
• HIGH ISOLATION VOLTAGE:
  BV: 3750 V_r.m.s. MIN
• OPEN COLLECTOR OUTPUT TYPE
• TAPE AND REEL AVAILABLE:
  PS9614L-E3, E4: 1000 Pcs/Reel


Application

• MEASUREMENT EQUIPMENT
• PDP
• FACTORY AUTOMATION NETWORK


Pinout




Specifications

SYMBOLS	PARAMETERS	UNITS	RATINGS
Diode
IF	Forward Current	mA	30
VR	Reverse Voltage	V	3
Detector
VCC	Supply Voltage	V	7
VO	Output Voltage	V	7
IO	Output Current	mA	25
PC	Power Dissipation	mW	40
BV	Isolation Voltage*2	Vr.m.s.	3750
TA	Operating Ambient Temp		−40 to +85
Tstg	Storage Temperature		−55 to +125

Notes:
1. Operation in excess of any one of these parameters may result in permanent
    damage.
2. AC voltage for 1 minute at T_A = 25 , RH = 60 % between input and output.


Description

NEC's PS9614 and PS9614L are optically coupled isolators containing a GaAIAs LED on the light emitting diode (input)
side and a photodiode and a signal procesing circuit on the detector (output) side on one chip. The PS9614 is in a plastic DIP (Dual In-line Package) and the PS9614L is a lead-bending type (Gull-wing) for surface mount.