PS9613

Number of Channels: 1, Unidirectional
Current - DC Forward (If): 25mA
Input Type: DC
Output Type: Open Collector
Mounting Type: Through Hole
Package / Case: 8-DIP (0.300", 7.62mm)
Supplier Device Package: 8-DIP
Packaging: Tube
Voltage - Isolation: 5000Vrms
Series: NEPOC
Manufacturer: CEL
Data Rate: 1Mbps
Current - Output / Channel: 15mA
Propagation Delay High - Low @ If: 250ns @ 10mA


Features:

• High instantaneous common mode rejection voltage (CM_H, CM_L = ±15 kV/ s MIN.)
• High-speed response (t_PHL = 500 ns MAX., t_PLH = 750 ns MAX.)
• Maximum propagation delays (t_PLH - t_PHL = 270 ns TYP.)
• Pulse width distortion ( | t_PHL - t_PLH | = 270 ns TYP.)
• Ordering number of taping product: PS9613L-E3, E4: 1 000 pcs/reel
• UL approved: File No. E72422 (S)
• VDE0884 approved (Option)


Application

• IPM Driver
• General purpose inverter


Pinout




Specifications

PARAMETERS		SYMBOLS	RATING	UNITS
Diode	Forward Current	IF	25	mA
	Reverse Voltage	VR	3.0	V
Detector	Supply Voltage	VCC	-0.5 to +35	V
	Output Voltage	VO	-0.5 to +35	V
	Output Current	IO	15	mA
	Power Dissipation	PC	100	mW
Isolation Voltage1		BV	5000	Vr.m.s.
Operating Ambient Temperature		TA	40 to +100
Storage Temperature		Tstg	-55 to +125

*1 AC voltage for 1 minute T_A = 25 , RH = 60 % between input and output.


Description

The PS9613 and PS9613L are optically coupled isolators containing a GaAlAs LED on the input side and a photo diode and a signal processing circuit on the output side on one chip.

The PS9613 is in a plastic DIP (Dual In-line Package) and the PS9613L is lead bending type (Gull-wing) for surface mounting.