Features: · Low On-resistance: 60Ohm typ, with ±5V Supplies, Minimizes Distortion· On-Resistance Matching between Channels Better than 6Ohm· Guaranteed Low Leakage Currents: <0.1nA at +25oC· Rail-to-Rail Analog Signal Range· Low Distortion: <0.04% (600Ohm)· Low Crosstalk: - 90dB @100kHz· TTL...
PS4053: Features: · Low On-resistance: 60Ohm typ, with ±5V Supplies, Minimizes Distortion· On-Resistance Matching between Channels Better than 6Ohm· Guaranteed Low Leakage Currents: <0.1nA at +25oC· Rail...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
US $13.66 - 14.71 / Piece
EMI/RFI Suppressors & Ferrites PCB Shield Enclosure Adhesive Base
US $16.12 - 20.67 / Piece
EMI/RFI Suppressors & Ferrites PCB Shield Enclosure to 5GHz
The PS4051/PS4052/PS4053 are precision low-voltage CMOS analog multiplexers/switches.
The PS4051 is an eight-channel single-ended mux designed to select one of eight inputs to a common output. What input is selected depends on the status of three address bits (ADDA-ADDC). The PS4052 is a differential four-channel mux, controlled by two address bits: ADDA, and ADDB. The PS4053 is a triple 2-to-1 mux (or triple SPDT, single-pole double-throw, switch).
The INH (inhibit) pin can be driven high, to open all switches PS4053 regardless of address bit status. All control inputs are TTL compatible when V+ = +5V.
These devices PS4053 are designed to operate with power supplies from ±2.7V to ±8V. Single-supply operation is possible from +2.7V to +16V.
When on, each switch PS4053 conducts current equally well in either direction and can handle rail-to-rail analog signals. In the off -state each switch blocks voltages up to the power-supply rails. Off-leakage current is guaranteed to be less than 0.1nA at +25, and < 2.5nA at +85.
These devices PS4053 are available in 16-pin DIP, Narrow SOIC, and QSOP packages for operation over the 40oC to +85oC temperature range.