PS2701-1-F3

Current Transfer Ratio :
Maximum Forward Diode Voltage :
Maximum Collector Current :
Maximum Power Dissipation :
Maximum Operating Temperature :
Minimum Operating Temperature :
Package / Case :
Input Type :
Maximum Collector Emitter Voltage :
Maximum Collector Emitter Saturation Voltage :
Packaging : Reel
Isolation Voltage : 3750 Vrms


Description

The PS2701-1-F3 is one member of the PS2701-1 series.The PS2701-1 is an optically coupled  isolator containing a GaAs light emitting diode and an NPN  silicon phototransistor.This package is SOP (Small Outline Package) type and has shield effect to cut off ambient light.It is designed for high density mounting applications.No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC.  NEC assumes no responsibility for any errors that may appear in this document.

Features of the PS2701-1-F3 are:(1)high isolation voltage (BV = 3 750 Vr.m.s.) ; (2)SOP (small outline package) type ; (3)High-speed switching (tr = 3 s TYP., tf = 5 s TYP.) ; (4)ordering number of taping product: PS2701-1-F3, F4 ; (5)safety standards.NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products.  No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others.

The absolute maximum ratings of the PS2701-1-F3 can be summarized as:(1)collector to emitter voltage:40 V;(2)emitter to collector voltage:6V;(3)collector current:80mA;(4)storage temperature:-55 to 150;(5)operating ambient temperature:-55 to 100;(6)power dissipation:150mW.Be aware that when voltage is applied suddenly between the photocoupler's input and output or between collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits,  software and information in the  design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information.