PS2501L-1-F3

The PS2501L-1-F3 is one member of the PS2501L-1 series.The PS2501L-1 is optically coupled isolators containing a GaAs light emitting diode and an NPN silicon phototransistor.The PS2501L-1 is lead bending type (Gull-wing) for surface mount.

Features of the PS2501L-1-F3 are:(1)high isolation voltage (BV =5000 Vr.m.s.) ; (2)high collector to emitter voltage (VCEO = 80 V); (3)High-speed switching (tr = 3 s TYP., tf = 5 s TYP.) ; (4)ordering number of tape product: PS2501L-1-E3, E4, F3, F4, PS2501L-2-E3, E4; (5)safety standards.NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products.  No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others.

The absolute maximum ratings of the PS2501L-1-F3 can be summarized as:(1)collector to emitter voltage:80 V;(2)emitter to collector voltage:7V;(3)collector current:50mA;(4)storage temperature:-55 to 150;(5)operating ambient temperature:-55 to 100;(6)power dissipation:150mW.Be aware that when voltage is applied suddenly between the photocoupler's input and output or between collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information.  Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.