PP900D120

Manufacturer: Powerex Inc
Type: IGBT
Voltage - Isolation: 2500VDC
Voltage: 1200V
Package / Case: Module
Series: POW-R-PAK™
Configuration: Half Bridge Inverter
Current: 900A


Features:

·High performance IGBT inverter bridge
·Integrated gate drive with fault monitoring & protection
·System status / troubleshooting LEDs to verify or monitor proper operation
·Isolated gate drive power supplies
·Low inductance laminated bus
·Output current measurement & feedback
·Superior short circuit detection & shoot through prevention

Specifications

General	Symbol		Units
IGBT Junction Temperature	Tj	-40 to +150	°C
Storage Temperature	Tstg	-40 to +125	°C
Operating Temperature	Top	-25 to +85	°C
Voltage Applied to DC terminals	VCC	800	Volts
Isolation Voltage, AC 1 minute, 60Hz sinusoidal	Viso	2500	Volts
IGBT Inverter
Collector Current (TC = 25°C)	IC	900	Amperes
Peak Collector Current (Tj < 150°C)	ICM	1800	Amperes
Emitter Current	IE	900	Amperes
Peak Emitter Current	IEM	1800	Amperes
Maximum Collector Dissipation (Tj < 150°C)	Pc	2670	Watts
Gate Drive Board
Unregulated +24V Power Supply		30	Volts
Regulated +15V Power Supply		18	Volts
PWM Signal Input Voltage		20	Volts
Fault Output Supply Voltage		30	Volts
Fault Output Current		50	mA

Description

The PP900D120 Powerex POW-R-PAK^TM is a configurable IGBT based power assembly that may be used as a converter, chopper, half or full bridge, or three phase inverter for motor control, power supply, UPS or other power conversion applications.

The PP900D120 power assembly is mounted on a forced aircooled heatsink and features state-of-the-art Powerex F-series trench gate IGBTs with low conduction and switching losses for high efficiency operation. The POW-R-PAK^TM includes a low inductance laminated bus structure, optically isolated gate drive interfaces, isolated gate drive power supplies, and a DC-link capacitor bank. The control board provides a simple user interface along with built-in protection features including overvoltage,undervoltage lockout, overcurrent,overtemperature, and short circuit detection.

Depending on application characteristics the PP900D120 POW-R-PAK^TM is suitable for operation with DC bus voltages up to 800VDC and switching frequencies above 20kHz.


Parameters:

Technical/Catalog Information	PP900D120
Vendor	Powerex Inc
Category	Integrated Circuits (ICs)
Package / Case	Module
Mounting Type	Screw Mount
Type	Half Bridge
Voltage - Supply	15 V (Reg), 24 V (Unreg)
On-State Resistance	-
Current - Output / Channel	900A
Current - Peak Output	1800A
Packaging	Bulk
Input Type	Inverting
Number of Outputs	1
Operating Temperature	-25°C ~ 85°C
Lead Free Status	Lead Not Applicable
RoHS Status	RoHS Not Applicable
Other Names	PP900D120 PP900D120