PICDEM2

The PICDEM2 is a simple board which demonstrates the capabilities of the 28- and 40-pin PIC16CXXX and PIC18CXXX devices.The PICDEM2 can be used stand-alone with a programmed part, or with an emulator system, such as MPLAB® ICE. Sample programs are provided to  demonstrate the unique features of the supported devices.

Features of the PICDEM2 are:(1)40- and 28-pin DIP sockets (Although 2 sockets are provided, only one device may be used at a time.); (2)On-board +5V regulator for direct input from 9V, 100mA AC/DC wall adapter or 9V battery, or hooks for a +5V, 100mA regulated DC supply.; (3)RS-232C socket and associated hardware for direct connection to RS-232C interface.; (4)Unpopulated holes for Access.bus. connector and associated; (5)hardware.; (6)5K pot for devices with analog inputs.; (7)Three push button switches for external stimulus and RESET.; (8)Green power-on indicator LED.; (9)Eight red LEDs connected to PORTB for displaying 8-bit binary values.; (10)Jumper to disconnect LEDs from PORTB.; (11)Socket for "canned" crystal oscillator.; (12)Unpopulated holes provided for crystal connection.; (13)Unpopulated holes provided for Timer1 external crystal.; (14)Jumper to disconnect on-board RC oscillator (approximately 2 MHz).; (15)128 x 8 Serial EEPROM.; (16)LCD module header.; (17) Keyboard header.; (18)Prototype area for user hardware.

If you want to know more information such as the electrical characteristics about the PICDEM2, please download the datasheet in www.seekic.com or www.chinaicmart.com.