PI5C6800

Features:

• Near-Zero propagation delay
• 5 switch connection between two ports
• Ultra-low quiescent power (0.2A typ.)
• Ideally suited for notebook applications
• A port is hot swapable
• Packaging (Pb-free & Green available): 24-pin 150-mil wide QSOP (Q) 24-pin 173-mil wide TSSOP (L)




Pinout






Specifications

Product Specs: Voltage: 5V Function: 2-Port Pins: 24 Package: TSSOP (L24)QSOP (Q24) Pb-Free and Green: Yes - more info RoHS Material Declarations: PI5C6800LE MDR (pdf)PI5C6800QE MDR (pdf)

Storage Temperature .....................................................65°C to +150°C
Supply Voltage Range.........................................................0.5V to +7V
DC Input Voltage(2).............................................................0.5V to +7V
Input Clamp Current, IIK (V1<0) ..................................................50mA
DC Output Current........................................................................120mA
Power Dissipation(3) ........................................................................ 0.5W

Notes: 1. Stresses greater than those listed under MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability.
2. The input and output negative-voltage ratings may be exceeded if the input and output clamp-current ratings are observed.
3. The maximum package power dissipation is calculated using a junction temperatue of 150°C and a board trace ength of 750 mils.

Description

PI5C6800: 10-Bit Bus Switch w/Pre-Charged O/P (PCI Hot-Plug);low On-State resistance. The bus switch creates no additional propagation delay.

The PI5C6800 switch is turned on by a single enable (ON) input. When ON is LOW, the switch is on and port A is connnected to port B. When ON is HIGH, the switch between port A and port B is open and the B port is precharged to BIASV through the equivalent of a 10-k resistor.