PI49FCT807T

Features:

· Guaranteed low skew: 0.25ns
· Low input capacitance
· Minimum duty cycle distortion
· 1:10 fanout
· High speed: 3.5ns propagation delay
· TTL input and CMOS output compatibleVOH = 3.3V (typ.) VOL = 0.3V (typ.)
· Packages available: 20-pin 300 mil wide SOIC (S) 20-pin 150 mil wide QSOP (Q) 20-pin 209 mil wde SSOP (H)
· Industrial Operation at -40ºC to +85ºC




Pinout






Specifications

Product Specs: Voltage: 5V Function: Buffer, Driver Jitter: - Skew: 500ps Speed: 50MHz I/O: CMOS Temp: Ind Outputs: 10 Pins: 20 Packages: SOIC (S20) Pb-Free and Green: Yes - S - more info RoHS Material Declarations: PI49FCT807TQE MDR (pdf)

Above which the useful life may be impaired. For user guidelines, not tested.

Storage Temperature ........................................................... 65°C to +150°C
Ambient Temperature with Power Applied ............................ -40°C to +85°C
Supply Voltage to Ground Potential (Inputs & Vcc Only) ..... 0.5V to +7.0V
Supply Voltage to Ground Potential (Outputs & D/O Only) .. 0.5V to +7.0V
DC Input Voltage .................................................................. 0.5V to +7.0V
DC Output Current ............................................................................. 120mA
Power Dissipation .................................................................................. 0.5W

Note: Stresses greater than those listed under MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods mayaffect reliability.

Description

5V, 50MHz 1:10 Output Clock Driver, Industrial Temp. Operation. Pericom Semiconductor's PI49FCT series of logic circuits are produced using the Company's advanced 0.8 micron CMOS technology, achieving industry leading speed grades.

In the PI49FCT series  series, the PI49FCT807T and PI49FCT2807T clock drivers feature one input and ten outputs. The large fanout from a single input line reduces loading on input clock. TTL level outputs reduce noise levels on the part. Typical applications are clock and signal distribution.The PI49FCT2807T also features a 25-ohm on-chip resistor for lower noise.