PI3C3125

Above which the useful life may be impaired. For user guidelines, not tested.

Storage Temperature............................................................ 65°C to +150°C
Ambient Temperature with Power Applied ............................. 40°C to +85°C
Supply Voltage to Ground Potential (Inputs & VCC Only) ...... 0.5V to +4.6V
Supply Voltage to Ground Potential (Outputs & D/O Only) .... 0.5V to +4.6V
DC Input Voltage ..................................................................... 0.5V to +5.5V
DC Output Current ............................................................................... 120mA
Power Dissipation ................................................................................... 0.5W

Note: Stresses greater than those listed under MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability.

Pericom Semiconductor's PI3C series of logic circuits are produced using the Company's advanced sub micron CMOS technology, achieving industry leading speed grades.

In the PI3C series , the PI3C3125A and PI3C3126A are 2.5V or 3.3 Volt, 4-bit bus switches designed with four individual 5W bus switches with fast indiviual enables in an industry standard 74XX125/126 pinout.

When enabled via the associated Bus Enable (BE) pin, the "A" pin is directly connected to the "B" pin for that particular gate. The bus switch introduces no additional propagation delay or additional ground bounce noise.The PI3C3125 device has active LOW enables, and the PI3C3126A has active HIGH enables. It is very useful in switching signals that have high bandwidth (>400 MHz). PI3C series is 3.3V, High-Bandwidth Bus Switch, 4-Bit, w/Individual Enables