PH502HR

The PH502HR is a digital-output light receiving IC,integrating a photodiode and a signal processing circuit in one chip. Direct connection with an IC without using a processing circuit simplifies the circuit configuration. PH502HR is most suitbale as various sensors in OA and AV equipment.Combination with the small infared LED SE308 allows the digital-output photointerrupter to be composed. In addtion, the PH502HR is ideally suited for the application of the light-receiving module internal elements of a simplified optical transmission link.At the time of receiving-light shielding,the output is set at the low level.It has many unique features: The first one is schmidt trigger circuit incorporated. The second one is low threshold irradiance.The third one is direct connection with TTL,LSTTL,and CMOS allowed.The forth one is wide-range operating source voltage. The fifth one is high speed response. The sixth one is active high type.Besides, there are also some applications. The first one is sensor for PPCs,FAXs, PRINTERS,ELECTRONIC TYPEWRITERs, FDDs and OA EQUIPMENT. The second one is sensors for VTRs,VDs,CDs,AVs. The third one is hook sensor for telephones.

There are some electrical characteristics about PH502HR.Operating source voltage(Vcc) is 4.5 V min and 17 V max. Low level output voltage(VOL) is 0.15 V typ and 0.4 V max when IOL is 16 mA and Vcc is 5 V.High level output voltage(VOH) is 4.9 V min when Vcc is 5 V and H is 50 uW/cm2.Low level supply current(ICCL) is 2.5 mA typ and 5 mA max when Vcc is 5 V and H is 0.High level supply current(ICCH) is 1 mA typ and 3 mA max when Vcc is 5 V and H is 50 uW/cm2.Tranmission delay time(tPLH) is 3.3 us typ and 9 us max when Vcc is 5 V, H is 50 uW/cm2, RL is 280 ohms. Rise time(tr) is 100 ns typ and 300 ns max when Vcc is 5 V, H is 50 uW/cm2 and RL is 280 ohms.

Well, this is a simple introduction to PH502HR, if you want to know more about it, please pay more attention to our web. Thanks for your attention!