PEB22522

Features: · Single chip MDSL transceiver· Plastic TQFP-100 package· Typical 450 mW power consumption at 1 Mbit/s· TC-PAM linecode with 2,3 or 4 Bits/symbol· Transmission of any bit rate between 512 kbit/s and 1040 kbit/s1)· Same hardware for all bit rates· Meets ETSI/ANSI HDSL and ISDN performance...

product image

PEB22522 Picture
SeekIC No. : 004458010 Detail

PEB22522: Features: · Single chip MDSL transceiver· Plastic TQFP-100 package· Typical 450 mW power consumption at 1 Mbit/s· TC-PAM linecode with 2,3 or 4 Bits/symbol· Transmission of any bit rate between 512 ...

floor Price/Ceiling Price

Part Number:
PEB22522
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2024/11/25

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

· Single chip MDSL transceiver
· Plastic TQFP-100 package
· Typical 450 mW power consumption at 1 Mbit/s
· TC-PAM linecode with 2,3 or 4 Bits/symbol
· Transmission of any bit rate between 512 kbit/s and 1040 kbit/s1)
· Same hardware for all bit rates
· Meets ETSI/ANSI HDSL and ISDN performance
· Embedded µC for easy start-up
· Universal 8-Bit µC interface
· Transparent transmission or built-in Framer
1) Bit rates below 512 kbit/s on request
· Inputs and Outputs TTL level
· Software access to D-Bits
· Central office (COT) and remote (RT) operation (master/slave)
· Warmstart capability
· Power down mode
· 1.544 Mbit/s, 2 Mbit/s and 4 Mbit/s TDM interface
· Tolerates input jitter according to I.431 jitter transfer function
· Easy software download
· Diagnostic loop backs
· DECT base station synchronization and delay measurement
· 2B1Q mode
· Operation speed selectable by software only
· JTAG boundary scan



Application

·N-channel DAML systems
· Fractional T1/E1 systems
· Broadband subscriber access for voice and data
· Line cards for central office and loop carriers
· Network terminators (NTs)
· DSLAMs
· ISDN H0 transport
· Remote LAN Access (Home office)
· Videoconferencing
· Access to cellular base stations
· RITL and WLL systems
· SDH and SONET termination
· Leased line services
· Frame Relay services
· PBX trunk lines



Description

MDSL PEB22522 (Medium bit rate Digital Subscriber Line) covers the sub SDSL (Symmetric/Single Pair bit rate DSL) rates at a granularity of 8 kbit/s. The MuBIC 2 is the 2nd generation of the Infineon MDSL product family which fills the gap between ISDN and SDSL. Using the TC-PAM coding scheme the MuBIC 2 PEB22522 offers an excellent transmission performance in combination with a very low interference with other services like POTS, ISDN, HDSL, ADSL, ADSL Lite and VDSL in the same bundle. The exceptional low power consumption of less than 500 mW at 1 Mbit/s meets manufacturers requirements for remote fed equipment e.g. for life line service. The tiny TQFP-100 package of PEB22522 contains a lot of additional functionality like framer and microcontroller.




Customers Who Bought This Item Also Bought

Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.
Industrial Controls, Meters
Semiconductor Modules
Power Supplies - External/Internal (Off-Board)
Optoelectronics
Undefined Category
View more