Features: ` High-Performance Delta-Sigma
Analog-to-Digital Converter
` Differential Voltage Inputs Dynamic Performance:
- Dynamic Range (A-Weighted): Up to 112dB
- THD+N: As low as -105dB
` Three Sampling Modes:
- Supports Output Sampling Rates Up to 108kHz
- Choose from Low Power, High-Performance, or Double Speed Modes
` Audio Serial Port Interface:
- Master or Slave Mode Operation
- 24-Bit Linear PCM Output Data
- Left-Justified/DSP-Compatible Data Format
` Digital High-Pass Filter for DC Removal:
- Includes a High-Pass Filter Disable Pin Power Supplies:
- Requires a +5V Analog Power Supply
- Supports a +1.8V to +3.3V Digital
` Power Supply Range Low Power Dissipation
- 49mW Typical (Low Power Mode with VDD = +3.3V)
- 39mW Typical (Low Power Mode with VDD = +1.8V)
` Power Down Mode
- Less than 50W total power dissipation
` Available in a small TSSOP-16 Package
Application· Digital Wireless Microphones
· Battery-Powered Audio Recording and Processing Equipment
Pinout
Specifications
|
|
PCM4104 |
UNIT |
| Supply voltage |
VCC |
+6.0 |
V |
| VDD |
VDD |
V |
| Ground voltage difference |
AGND to DGND |
±0.1 |
V |
| Digital input voltage |
RATE, S/M, RST, HPFD SCKI, BCK, FSYNC |
-0.3 to (VDD + 0.3) |
V |
| Analog input voltage |
VIN+, VIN-
|
-0.3 to (VCC + 0.3) |
V |
| Input current (any pin except supplies) |
±10mA |
mA |
| Operating temperature range |
-10 to +70 |
|
| Storage temperature range, TSTG |
-65 to +150 |
|
(1)Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. Exposure to absolute maximum conditions for extended periods may degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those specified is not implied.
DescriptionThe PCM4201 is designed for digital audio applications that require a combination of high dynamic range, low distortion, and low power consumption. The primary applications for the PCM4201 include digital wireless microphones and battery-operated audio recording or processing equipment. The PCM4201 outputs 24-bit linear PCM audio data at sampling rates up to 108kHz.
Three sampling modes PCM4201 allow the user to trade off power for performance, dependent upon the intended system requirements. An on-chip voltage reference reduces the number of external components needed for operation.
The PCM4201 includes dedicated control pins for configuration of all programmable functions. The device requires a +5.0V analog power supply, in addition to a digital supply operating from +1.8V to +3.3V. The PCM4201 is available in a small TSSOP-16 package.
PCM4201 Data Sheet
