Features: `PCM2900: Without S/PDIF `PCM2902: With S/PDIF `On-Chip USB Interface: - With Full-Speed Transceivers - Fully Compliant With USB 1.1 Specification - Certified by USB-IF - Partially Programmable Descriptors(1) - USB Adaptive Mode for Playback - USB Asynchronous Mode for Record - Bus Power...
PCM2900: Features: `PCM2900: Without S/PDIF `PCM2902: With S/PDIF `On-Chip USB Interface: - With Full-Speed Transceivers - Fully Compliant With USB 1.1 Specification - Certified by USB-IF - Partially Program...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
`PCM2900: Without S/PDIF
`PCM2902: With S/PDIF
`On-Chip USB Interface:
- With Full-Speed Transceivers
- Fully Compliant With USB 1.1 Specification
- Certified by USB-IF
- Partially Programmable Descriptors(1)
- USB Adaptive Mode for Playback
- USB Asynchronous Mode for Record
- Bus Powered
`16-Bit Delta Sigma ADC and DAC
`Sampling Rate:
- DAC: 32, 44.1, 48 kHz
- ADC: 8, 11.025, 16, 22.05, 32, 44.1, 48 kHz
`On-Chip Clock Generator:
- With Single 12-MHz Clock Source
`Single Power Supply: 5 V TYP (VBUS ) Stereo ADC
- Analog Performance at VBUS = 5 V
- THD+N = 0.01%
- SNR = 89 dB
- Dynamic Range = 89 dB
- Decimation Digital Filter
- Pass-Band Ripple = ±0.05 dB
- Single-Ended Voltage Input
- Antialiasing Filter Included
- Digital LCF Included
`Stereo DAC
- Analog Performance at VBUS = 5 V
- THD+N = 0.005%
- SNR = 96 dB
- Dynamic Range = 93 dB
- Oversampling Digital Filter
- Pass-Band Ripple = ±0.1 dB
- Stop-Band Attenuation = 43 dB
- Single-Ended Voltage Output
- Analog LPF Included Multifunctions:
- Human Interface Device (HID) Volume ±
`Control and Mute Control
- Suspend Flag Package: 28-Pin SSOP
·USB Audio Speaker
·USB Headset
·USB Monitor
·USB Audio Interface Box
PCM2900/PCM2902 |
UNIT | ||
Supply voltage, VBUS |
-0.3 to 6.5 |
V | |
Ground voltage differences, AGNDC, AGNDP, AGNDX, DGND, DGNDU |
±0.1 |
V | |
Digital input voltage | SEL0, SEL1, TEST0 (DIN)(2) |
-0.3 to 6.5 |
V |
D+, D, HID0, HID1, HID2, XTI, XTO, TEST1 (DOUT)(2) , SSPND |
-0.3 to (VDDI + 0.3)< 4 | ||
Analog input voltage | VIN L, VIN R, VCOM , VOUT R, VOUT L |
-0.3 to VCCCI + 0.3)< 4 |
V |
VCCCI , VCCP1I , VCCP2I , VCCXI , VDDI |
-0.3 to 4 | ||
Input current (any pins except supplies) |
±10 |
mA | |
Ambient temperature under bias |
-40 to 125 |
||
Storage temperature, Tstg |
-55 to 150 |
||
Junction temperature TJ |
150 |
||
Lead temperature (soldering) |
260 |
, 5 s | |
Package temperature (IR reflow, peak) |
250 |
(1)Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2)( ): PCM2902
The PCM2900/2902 is Texas Instruments single-chip USB stereo audio codec with USB-compliant full-speed protocol controller and S/PDIF (only PCM2902). The USB protocol controller works with no software code, but the USB descriptors can be modified in some areas (e.g., vendor ID/product ID). The PCM2900/2902 employs SpAct(TM) architecture, TI's unique system that recovers the audio clock from USB packet data. On-chip analog PLLs of PCM2900 with SpAct enable playback and record with low clock jitter and with independent playback and record sampling rates.