Features: `On-Chip USB Interface: - With Full-Speed Transceivers- Fully Compliant With USB 1.1 Specification - Certified by USB-IF - Partially Programmable Descriptor - Adaptive Isochronous Transfer for Playback - Bus-Powered or Self-Powered Ope `Sampling Rate: 32, 44.1, 48 kHz `On-Chip Clock Gene...
PCM2706: Features: `On-Chip USB Interface: - With Full-Speed Transceivers- Fully Compliant With USB 1.1 Specification - Certified by USB-IF - Partially Programmable Descriptor - Adaptive Isochronous Transfer...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
`On-Chip USB Interface:
- With Full-Speed Transceivers
- Fully Compliant With USB 1.1 Specification
- Certified by USB-IF
- Partially Programmable Descriptor
- Adaptive Isochronous Transfer for Playback
- Bus-Powered or Self-Powered Ope
`Sampling Rate: 32, 44.1, 48 kHz
`On-Chip Clock Generator:
Single 12-MHz Clock Source Single Power Supply:
- Bus-Powered: 5 V, Typical (V ) BUS
- Self-Powered: 3.3 V, Typical
`16-Bit Delta-Sigma Stereo DAC
- Analog Performance at 5 V (Bus), 3.3 V (Self):
- THD+N: 0.006% (RL > 10 k , Self-Powered)
- THD+N: 0.025% (RL = 32 )
- SNR: 98 dB
- Dynamic Range: 98 dB
- PO: 12 mW (RL = 32 )
- Oversampling Digital Filter
- Pass-Band Ripple: ±0.04 dB
- Stop-Band Attenuation: 50 dB
- Single-Ended Voltage Output
- Analog LPF Included
`Multiple Functions:
- Up to Eight Human Interface Device (HID) Interfaces (Depending on Model and
`Settings)
- Suspend Flag
- S/PDIF Out With SCMS
- External ROM Interface (PCM2704/6)
- Serial Programming Interface (PCM2705/7)
- I2S Interface (Selectable on PCM2706/7) Package:
- Lead-Free Product
- 28-Pin SSOP (PCM2704/5)
- 32-Pin TQFP (PCM2706/7)
·USB Headphones
·USB Audio Speaker
·USB CRT/LCD Monitor
·USB Audio Interface Box
·USB-Featured Consumer Audio Product
UNITS | ||
Supply voltageSupply voltage |
VBUS |
0.3 V to 6.5 V |
VCCP , VCCL , VCCR , VDD |
0.3 V to 4 V | |
Supply voltage differences |
VCCP , VCCL , VCCR , VDD |
±0.1 V |
Ground voltage differences |
PGND, AGNDL, AGNDR, DGND, ZGND |
±0.1 V |
Digital input voltage |
HOST |
0.3 V to 6.5 V |
D+, D, HID0/MS, HID1/MC, HID2/MD, XTI, XTO,DOUT,SSPND, CK, DT, PSEL, FSEL, TEST, TEST0, TEST1, FUNC0, FUNC1,FUNC2, FUNC3 |
0.3 V to (VDD + 0.3) V < 4 V | |
Analog input voltageAnalog input voltage |
VCOM |
0.3 V to (VCCP + 0.3) V < 4 V |
VOUTR |
0.3 V to (VCCR + 0.3) V < 4 V | |
VOUTL |
0.3 V to (VCCL + 0.3) V < 4 V | |
Input current (any pins except supplies) |
±10 mA | |
Ambient temperature under bias |
40 to 125 | |
Storage temperature |
55 to 150 | |
Junction temperature |
150 | |
Lead temperature (soldering) |
260, 5 s | |
Package temperature (IR reflow, peak) |
260 |
The PCM2706 is TI's single-chip USB stereo audio DAC with USB 1.1 compliant full-speed protocol controller and S/PDIF. The USB-protocol controller works with no software code, but USB descriptors can be modified in some parts (for example, vendor ID/product ID) through the use of an external ROM (PCM2706) SPI (PCM2705/7) or on request. The PCM2706 employs SpAct(TM) architecture, TI's unique system that recovers the audio clock from USB packet data. On-chip analog PLLs with SpAct enable playback with low clock jitter.