Position: Home  > All Categories> Integrated Circuits (ICs) > PC755B

PC755B

Features: 18.1SPECint95, Estimates 12.3 SPECfp95 at 400 MHz (PC755B)15.7SPECint95, 9SPECfp95 at 350 MHz (PC745B)733 MIPS at 400 MHz (PC755B) at 641 MIPS at 350 MHz (PC745B)Selectable Bus Clock (12 CPU Bus Dividers up to 10x)PD Typical 6.4W at 400 MHz, Full Operating Conditions.Nap, Doze and Sleep ...

product image

PC755B Picture
See larger image
SeekIC No. : 004456065 Detail

PC755B: Features: 18.1SPECint95, Estimates 12.3 SPECfp95 at 400 MHz (PC755B)15.7SPECint95, 9SPECfp95 at 350 MHz (PC745B)733 MIPS at 400 MHz (PC755B) at 641 MIPS at 350 MHz (PC745B)Selectable Bus Clock (12 C...

PC755B Data Sheet

floor Price/Ceiling Price

Get Latest Price
Part Number:
PC755B
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2024/11/24

add to my favourite

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

18.1SPECint95, Estimates 12.3 SPECfp95 at 400 MHz (PC755B)
15.7SPECint95, 9SPECfp95 at 350 MHz (PC745B)
733 MIPS at 400 MHz (PC755B) at 641 MIPS at 350 MHz (PC745B)
Selectable Bus Clock (12 CPU Bus Dividers up to 10x)
PD Typical 6.4W at 400 MHz, Full Operating Conditions.
Nap, Doze and Sleep Modes for Power Savings
Superscalar (3 Instructions per Clock Cycle) Two Instruction + Branch
4 Beta Byte Virtual Memory, 4-GByte of Physical Memory
64-bit Data and 32-bit Address Bus Interface
32-KB Instruction and Data Cache
Six Independent Execution Units
Write-back and Write-through Operations
fINTmax = 400 MHz (TBC)
fBUS max = 100 MHz
Voltage I/O 2.5V/3.3V; Voltage Int 2.0V


Specifications

Characteristic Symbol Maximum Value Unit
Core supply voltage(4) VDD -0.3 to 2.5 V
PLL supply voltage(4) AVDD -0.3 to 2.5 V
L2 DLL supply voltage(4) L2AVDD -0.3 to 2.5 V
Processor bus supply voltage(3) OVDD -0.3 to 3.6 V
L2 bus supply voltage(3) L2OVDD -0.3 to 3.6 V
Input voltage Processor bus(2)(5) Vin -0.3 to OVDD + 0.3V V
L2 Bus(2)(5) Vin -0.3 to L2OVDD + 0.3V V
JTAG Signals Vin -0.3 to 3.6 V
Storage temperature range Tstg -55 to 150 °C


Notes: 1. Functional and tested operating conditions are given in Table 4. Absolute maximum ratings are stress ratings only, and functional operation at the maximums is not guaranteed. Stresses beyond those listed may affect device reliability or cause permanent damage to the device.
2. Caution: VIN must not exceed OVDD or L2OVDD by more than 0.3V at any time including during power-on reset.
3. Caution: L2OVDD/OVDD must not exceed VDD/AVDD/L2AVDD by more than 1.6V during normal operation; this limit may be exceeded for a maximum of 20 ms during power-on reset and power-down sequences.
4. Caution: VDD/AVDD/L2AVDD must not exceed L2OVDD/OVDD by more than 0.4V during normal operation; this limit may beexceeded for a maximum of 20 ms during power-on reset and power-down sequences.
5. VIN may overshoot/undershoot to a voltage and for a maximum duration as shown in Figure 2.




Description

The PC755B and PC745B PowerPC® microprocessors are high-performance, lowpower, 32-bit implementations of the PowerPC Reduced Instruction Set Computer (RISC) architecture, especially enhanced for embedded applications.

The PC755B and PC745B microprocessors differ only in that the PC755B features an enhanced, dedicated L2 cache interface with on-chip L2 tags. The PC755B is a dropin replacement for the award winning PowerPC 750™microprocessor and is footprint and user software code compatible with the MPC7400 microprocessor with AltiVec™ technology. The PC745B is a drop-in replacement for the PowerPC 740™ microprocessor and is also footprint and user software code compatible with the PowerPC 603e™ microprocessor. PC755B/745B microprocessors provide on-chip debug support and are fully JTAG-compliant.

The PC745B microprocessor is pin compatible with the TSPC603e family.




Customers Who Bought This Item Also Bought

Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.
You may also be interested in :
Undefined Category
VI-B63-IU
X27 589
Soldering, Desoldering, Rework Products
TGK-900M-B
TGK-900M-1.6D
Potentiometers, Variable Resistors
RV24YN
WXD4-23-3W
Relays
WIMA MKP4 0.22UF 630V
WIMA MKP4 4.7UF 630VDC
Line Protection, Backups
BX0023
A20B-1008-0550
Boxes, Enclosures, Racks
ACLSN12
ACLJIC
View more