Description
Features:
Multiprocessor and Local Bus Slave support
-Supports PowerPC 603eTM, PowerPC 740TM, PowerPC 750TM or PowerPC 7400TM microprocessors
-Operating bus frequency up to 100 MHz
-Supports either a second processor or a local bus slave
PCI Bus support
Integrated memory controller
-Controls processor and PCI interactions to main memory
-Supports a variety of DRAM (FPM, EDO), SDRAM, and ROM/Flash ROM up to 100 MHz
Power Management
-Provides hardware support for 4 level of power reduction: nap, doze, sleep and suspend
-Fully static design preserving internal logic states during power saving modes
Specifications
Processor Interface
-Process orbus frequency up to 100 MHz
-64-bit or 32-bit data bus and 32-bit address bus
-SMP support for a second processor
-Full memory coherency supported, integrated arbiter and slave peripheral support
-JTAG/COP for in-circuit hardware debugging
-IEEE 1149.1 compliant, JTAG boundary-scan interface
PCI Interface
-Compliant with PCI specification, revision 2.1
-32-bit PCI interface operates up to 66 MHz
-PCI 5.0V tolerant
-Read and write buffers to improve PCI performance
-Selectable big or little endian operation
-PCI interface can be configured as host or agent, allowing multiple PC107 chips on same PCI bus
-Arbiter supports up to 5 other PCI devices
-Parity support
Memory Interface
-Highband width (32/64-bit) data bus up to 100 MHz
-Programmable timing supporting either DRAM (FPM, EDO) or SDRAM
-Support 1 to 8 banks - 4MB, 16MB, 64MB, 128MB, and/or 256MB DRAMs or SDRAMs
-1GB of RAM space, 144MB of ROM space
-8- bit, 32-bit or 64-bit ROM/Flash ROM
-PortX:8-, 32-, or 64-bit general-purpose I/O port uses ROM controller interface with address strobe
-Supports parity, read-modify-write, or error correcting code (ECC)
Other Embedded Features
-Two-Channel integrated DMA controller
-Message Unit and I²C controller
-Embedded Programmable Interrupt Controller (EPIC)
-Integrated PCI bus and SDRAM clock generation
-Programmable PCI and memory bus drivers
Packaging
-503 Flip-Chip PBGA package
Screening
-FC- PBGA upscreening based upon ATMEL-Grenoble standards
-Full military temperature range (Tj = -55°C, + 125°C)
-Industrial temperature range (Tj = -40°C, +110°C)