PB51

Input Bias Current (Max) :
Operating Supply Voltage :
Common Mode Rejection Ratio (Min) :
Output Current :
Packaging :
Number of Channels : 1
Shutdown : No
Maximum Operating Temperature : + 85 C
Mounting Style : Through Hole
Slew Rate : 100 V/us
Input Offset Voltage : 1.75 mV
Package / Case : SIP-13


Features:

• WIDE SUPPLY RANGE - ±15V to ±150V
• HIGH OUTPUT CURRENT -1.5A Continuous (PB51), 2.0A Continuous (PB51A)
• VOLTAGE AND CURRENT GAIN
• HIGH SLEW - 50V/s Minimum (PB51)
75V/s Minimum (PB51A)
• PROGRAMMABLE OUTPUT CURRENT LIMIT
• HIGH POWER BANDWIDTH - 320 kHz Minimum
• LOW QUIESCENT CURRENT - 12mA Typical
• EVALUATION KIT - EK29




Application

• HIGH VOLTAGE INSTRUMENTATION
• ELECTROSTATIC TRANSDUCERS & DEFLECTION
• PROGRAMMABLE POWER SUPPLIES UP TO 280V P-P




Specifications

SUPPLY VOLTAGE, +V_S to V_S ..................................300V
OUTPUT CURRENT, within SOA ..................................2.0A
POWER DISSIPATION, internal at TC = 25°C............83W
INPUT VOLTAGE, referred to COM ..........................±15V
TEMPERATURE, pin solder-10s max. ...................260°C
TEMPERATURE, junction1 .....................................175°C
TEMPERATURE RANGE, storage ................40 to +85°C
OPERATING TEMPERATURE RANGE, case.. 25 to +85°C




Description

The PB51 is a high voltage, high current amplifier designed to provide voltage and current gain for a small signal, general purpose op amp. Including the power booster within the feedback loop of the driver amplifier PB51 results in a composite amplifier with the accuracy of PB51 and the extended output voltage range and current capability of the booster. The PB51 can also be used without a driver in some applications, requiring only an external current limit resistor to function properly.

The output stage of PB51 utilizes complementary MOSFETs, providing symmetrical output impedance and eliminating second breakdown limitations imposed by Bipolar Transistors. Internal feedback and gainset resistors are provided for a pin-strapable gain of 3. Additional gain of PB51 can be achieved with a single external resistor. Compensation of PB51 is not required for most driver/gain configurations, but can be accomplished with a single external capacitor. Enormous flexibility is provided through the choice of driver amplifier, current limit, supply voltage, voltage gain,and compensation.

This hybrid circuit of PB51 utilizes a beryllia (BeO) substrate, thick film resistors, ceramic capacitors and semiconductor chips to
maximize reliability, minimize size and give top performance.Ultrasonically bonded aluminum wires provide reliable interconnections at all operating temperatures. The 12-pin Power SIP package is electrically isolated.

Parameters:

Technical/Catalog Information	PB51
Vendor	Cirrus Logic Inc
Category	Integrated Circuits (ICs)
Packaging	Tube
Amplifier Type	Power
Number of Circuits	1 - Single
Package / Case	12-SIP
Slew Rate	100 V/s
Gain Bandwidth Product	-
Current - Supply	14mA
Current - Output / Channel	1.5A
Voltage - Supply, Single/Dual (±)	30 V ~ 300 V, ±15 V ~ 150 V
Output Type	-
-3db Bandwidth	1MHz
Current - Input Bias	-
Operating Temperature	-25°C ~ 85°C
Voltage - Input Offset	750mV
Drawing Number	*
Lead Free Status	Contains Lead
RoHS Status	RoHS Non-Compliant
Other Names	PB51 PB51 598 1339 ND 5981339ND 598-1339