PB10FG-2405Z21H30

The PB10FG-2405Z21H30 is produced by the PEAK electronics with 3 KV isolated 2W regulated dual output DIP8.The electrical specifications(typical at + 25,nominal input voltage,rated output current unless otherwise specified) can be summarized as:(1)input voltage range:12 VDC,9 to 18 VDC,24 VDC,18 to 36 VDC;(2)input filter:Pi filter;(3)isolation rated voltage:3000 VDC;(4)isolation resistance:1000 MOhm;(5)isolation capacitance:80 pF;(6)output voltage accuracy:+/-1%, typ.;(7)ripple and noise (at 20 MHz BW):75 mV p-p,max.;(8)short circuit protection:continuous, auto restart;(9)line voltage regulation:+/-0.5% typ.;(10)load voltage regulation:+/-0.5 % typ.load=10 to 100%;(11)temperature coefficient:+/-0.02%/;(12)efficiency:continuous, auto restart;(13)switching frequency:150 KHz,typ.;(14)operating temperature(ambient):-25 to +71;(15)storage temperature:-55 to +125;(16)derating:see graph;(17)case material:non conductive black plastic.

The external capacitance:these converters PB10FG-2405Z21H30 will work with without external capacitors but they are necessary in order to guarantee the full line load range. All parts have been tested using the following recommended values.There are the application notes:(1)the outside control connection.this pin provides the converter output ON/OFF,and the control common is referred to negative input.(2)this pin belongs to the secondary side.it just avoids someone to reverses the primary and secondary.