PB10FG-1205E21H30

The PB10FG-1205E21H30 is produced by the PEAK electronics with 3 KV isolated 2W regulated dual output DIP8.The electrical specifications(typical at + 25,nominal input voltage,rated output current unless otherwise specified) can be summarized as:(1)input voltage range:12 VDC,9 to 18 VDC,24 VDC,18 to 36 VDC;(2)input filter:Pi filter;(3)isolation rated voltage:3000 VDC;(4)isolation resistance:1000 MOhm;(5)isolation capacitance:80 pF;(6)output voltage accuracy:+/-1%, typ.;(7)ripple and noise (at 20 MHz BW):75 mV p-p,max.;(8)short circuit protection:continuous, auto restart;(9)line voltage regulation:+/-0.5% typ.;(10)load voltage regulation:+/-0.5 % typ.load=10 to 100%;(11)temperature coefficient:+/-0.02%/;(12)efficiency:continuous, auto restart;(13)switching frequency:150 KHz,typ.;(14)operating temperature(ambient):-25 to +71;(15)storage temperature:-55 to +125;(16)derating:see graph;(17)case material:non conductive black plastic.

The external capacitance:these converters  PB10FG-1205E21H30 will work with without external capacitors but PB10FG-1205E21H30 are necessary in order to guarantee the full line load range. All parts of PB10FG-1205E21H30 have been tested using the following recommended values.There are the application notes:(1)the outside control connection.this pin provides the converter output ON/OFF,and the control common is referred to negative input.(2)this pin belongs to the secondary side.it just avoids someone to reverses the primary and secondary.