PACUSB-U2

• One upstream USB port terminator, EMI filter and transient overvoltage protector in a single surface-mount package
• Compact SC70 or SOT23 package saves board space and lowers manufacturing costs compared to discrete solutions
• ESD protection to ±30kV contact discharge per MIL-STD-883D, method 3015
• ESD protection to ±15kV contact discharge per IEC 61000-4-2 international standard
• Lead-free version available

The PACUSB-U1, PACUSB-U2, and PACUSB-U3 are single-channel USB upstream-port termination networks.

The PACUSB-U1/U2/U3 PACUSB-U2 integrate EMI/RFI filter components R1 and C1, as recommended by the USB specification. Because these are upstream USB devices, they are terminated with a single 1.5k pull-up resistor to V3.3 (R2).

There are three options for the value of the series resistor R1:

• For PACUSB-U1, R1=15
• For PACUSB-U2, R1=33
• For PACUSB-U3, R1=22

In addition, these parts of PACUSB-U2 provide a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The input and output pins are designed and characterized to dissipate ESD strikes of ±15kV safely, a level well beyond the maximum requirements of the IEC 61000-4-2 international standard.

Using the MIL-STD-883D (Method 3015) specification for Human Body Model (HBM) ESD, all pins are protected for contact discharges to greater than ±30kV.

The PACUSB-U1/U2/U3 is housed in either a 6-pin SC70 or 6-pin SOT23 package and is available with optional lead-free finishing.

Note: Some of the devices listed here have suggested replacements available. Please see additional information at the end of this page.