Operational Amplifiers - Op Amps Linear Op-Amp 400V .2A
PA90: Operational Amplifiers - Op Amps Linear Op-Amp 400V .2A
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Number of Channels : | 1 | Common Mode Rejection Ratio (Min) : | 80 dB |
Input Offset Voltage : | 2 mV | Input Bias Current (Max) : | 2000 pA |
Mounting Style : | Through Hole | Package / Case : | SIP-12 |
Slew Rate : | 300 V/us | Shutdown : | No |
Maximum Operating Temperature : | + 85 C |
• HIGH VOLTAGE - 400V (±200V)
• LOW QUIESCENT CURRENT - 10mA
• HIGH OUTPUT CURRENT - 200mA
• PROGRAMMABLE CURRENT LIMIT
• HIGH SLEW RATE - 300V/s
• PIEZOELECTRIC POSITIONING
• HIGH VOLTAGE INSTRUMENTATION
• ELECTROSTATIC TRANSDUCERS
• PROGRAMMABLE POWER SUPPLIES UP TO 390V
SUPPLY VOLTAGE, +VS to VS ..............................................400V
OUTPUT CURRENT, source, sink, peak ............350mA, within SOA
POWER DISSIPATION, continuous @ TC = 25 .....................30W
INPUT VOLTAGE, differential .................................................±20V
INPUT VOLTAGE, common mode .............................................±VS
TEMPERATURE, pin solder - 10s max ....................................220
TEMPERATURE, junction2 ......................................................150
TEMPERATURE, storage ...........................................65 to +150
OPERATING TEMPERATURE RANGE, case .................55 to +125
The PA90 is a high voltage, low quiescent current MOSFET operational amplifier PA90 designed as a low cost solution for driving continuous output currents up to 200mA and pulse currents up to 350mA. The safe operating area (SOA) has no secondbreakdown limitations and can be observed for all type loads by choosing an appropriate current limiting resistor. The MOSFET output stage of PA90 is biased AB for linear operation.
External compensation provides flexibility of PA90 in choosing bandwidth and slew rate for the application. APEX's Power SIP12 package uses a minimum of board space allowing for high density circuit boards.
Technical/Catalog Information | PA90 |
Vendor | Cirrus Logic Inc |
Category | Integrated Circuits (ICs) |
Packaging | Tube |
Amplifier Type | Power |
Number of Circuits | 1 - Single |
Package / Case | 12-SIP |
Slew Rate | 300 V/s |
Gain Bandwidth Product | 100MHz |
Current - Supply | 10mA |
Current - Output/Channel | 200mA |
Voltage - Supply, Single/Dual (±) | 80 V ~ 400 V, ±40 V ~ 200 V |
Output Type | - |
-3db Bandwidth | - |
Current - Input Bias | 200pA |
Operating Temperature | -25°C ~ 85°C |
Voltage - Input Offset | 500V |
Lead Free Status | Contains Lead |
RoHS Status | RoHS Non-Compliant |
Other Names | PA90 PA90 598 1330 ND 5981330ND 598-1330 |