PA2010

The PA2010 is designed as one kind of 200 to 2000MHz TO-8 cascadable amplifiers.

PA2010 has four features. (1)High power output +25.5dBm typ. (2)High third order IP3 +33dBm typ. (3)Moderate noise figure 5.0dB typ. (4)Low VSWR 1.5:1 typ. Those are all the main features.

Some absolute maximum ratings have been concluded into several points of PA2010 as follow. (1)Its storage temperature range would be from -62°C to 150°C. (2)Its max case temperature would be 85°C. (3)Its max DC voltage would be 17V. (4)Its max continuous RF input power would be +17dBm. (5)Its max short term RF input power 1minute max would be 100mW. (6)Its max peak power 3us max would be 0.5W. (7)Its "S" series burn-in temperature case would be 85°C. It should be noted that stresses above those listed in absolute maximum ratings may cause permanent damage to device.

Also some electrical characteristics of PA2010 are concluded as follow. (1)Its frequency owuld be from 0.2GHz to 2.4GHz. (2)Its small signal gain min would be 10.0dB. (3)Its gain flatness max would be +/-0.3dB. (4)Its reverse isolation would be 20dB. (5)Its noise figure max would be 5.0dB. (6)Its power output at 1dB comp. min would be 25.5dBm. (7)Its IP3 would be typ +33dBm. (8)Its IP2 would be typ +50dBm. (9)Its second order harmonic IP would be typ +55dBm. (10)Its VSWR input max would be 1.8:1. (11)Its VSWR output max would be 1.5:1. (12)Its DC current at 15V max would be 179mA. (12)Its thermal resistance would be 50°C/W. (13)Its transistor power dissipation would be 1.25W. (14)Its junction temperature rise above case Tjc would be 63°C. And so on. At present we have not got so much information about this IC and we would try hard to get more information about it. If you have any question or suggestion or want to know more information please contact us for details. Thank you!