PA01

Operating Supply Voltage :
Output Current :
Packaging :
Number of Channels : 1
Shutdown : No
Common Mode Rejection Ratio (Min) : 70 dB
Maximum Operating Temperature : + 85 C
Mounting Style : Through Hole
Input Bias Current (Max) : 50 nA
Input Offset Voltage : 12 mV
Package / Case : TO-3
Slew Rate : 2.6 V/us


Features:

• LOW COST, ECONOMY MODEL - PA01
• SECOND SOURCEABLE - PA73
• HIGH OUTPUT CURRENT - Up to ±5A PEAK
• EXCELLENT LINEARITY - PA01
• HIGH SUPPLY VOLTAGE - Up to ±30V
• ISOLATED CASE - 300V


Application

• MOTOR, VALVE AND ACTUATOR CONTROL
• MAGNETIC DEFLECTION CIRCUITS UP TO 4A
• POWER TRANSDUCERS UP TO 20kHz
• TEMPERATURE CONTROL UP TO 180W
• PROGRAMMABLE POWER SUPPLIES UP TO 48V
• AUDIO AMPLIFIERS UP TO 50W RMS


Specifications

SUPPLY VOLTAGE, +VS to VS                   60V                       68V
OUTPUT CURRENT, within SOA                    5A                         5A
POWER DISSIPATION, internal                    67W                     67W
INPUT VOLTAGE, differential                       ±VS 3V              ±VS 3V
INPUT VOLTAGE, common-mode                 ±VS                      ±VS
TEMPERATURE, junction1                            200°C                  200°C
TEMPERATURE, pin solder -10s                   300°C                  300°C
TEMPERATURE RANGE, storage                 65 to +150°C     65 to +150°C
OPERATING TEMPERATURE RANGE, case   25 to +85°C       25 to +85


Description

The PA01 and PA73 are high voltage, high output current operational amplifiers designed to drive resistive, inductive and capacitive loads. For optimum linearity, the PA01 has a class A/B output stage. The PA73 has a simple class C output stage (see Note 1) to reduce cost for motor control and other applications where crossover distortion is not critical and to provide interchangeability with type 3573 amplifiers. The safe operating area (SOA) can be observed for all operating conditions by selection of user programmable current limit resistors.

PA01 are internally compensated for all gain settings. For continuous operation under load, a heatsink of proper rating is recommended. This hybrid integrated circuit utilizes thick film (cermet) resistors, ceramic capacitors and semiconductor chips to maximize reliability, minimize size and give top performance. Ultrasonically bonded aluminum wires ofPA01 provide reliable interconnections at all operating temperatures. The 8-pin TO-3 package is hermetically sealed and electrically isolated. The use of compressible thermal washers and/or improper mounting torque will void the product warranty. Please see "General Operating Considerations".

Parameters:

Technical/Catalog Information	PA01
Vendor	Cirrus Logic Inc
Category	Integrated Circuits (ICs)
Packaging	Tube
Amplifier Type	Power
Number of Circuits	1 - Single
Package / Case	TO-3-8
Slew Rate	2.6 V/s
Gain Bandwidth Product	1MHz
Current - Supply	20mA
Current - Output/Channel	5A
Voltage - Supply, Single/Dual (±)	20 V ~ 56 V, ±10 V ~ 28 V
Output Type	-
-3db Bandwidth	-
Current - Input Bias	15nA
Operating Temperature	-25°C ~ 85°C
Voltage - Input Offset	5000V
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	PA01 PA01 598 1285 ND 5981285ND 598-1285