P18TG-123R3Z2:1H35

      Here are some Electrical Specifications of P18TG-123R3Z2:1H35, when the Typical enviroment is at + 25° C, nominal input voltage, rated output current unless otherwise specified. It consists of the Input Specifications, Isolation Specifications, Output Specifications, General Specifications, Environmental Specifications, Physical Characteristics.
      Firstly, in the Input Specifications, voltage range 9 -18 VDC (12 VDC), 18 - 36 VDC (24 VDC) and 36 -72 VDC (48 VDC) and the filter is Pi Network. Sencondly, in the Isolation Specifications, rated voltage is 1500 Vdc, leakage current is 1 mA, resistance is 109 Ohm, capacitance is 120 pF typ. Thirdly, in the Output Specifications, voltage accuracy is +/- 1 % typ and the maxium is +/-2%. The maxium of the ripple and noise at 20 MHz BW is 60 mV p-p. If the short circuit protection or the continuous happens, it will restart automaticly. The maxium of line voltage regulation is +/- 0,5 %. The maxium of load voltage regulation is +/- 0,5 %. Temperature coefficient is +/- 0,02 % / °C. Fourthly, in the General Specifications, Efficiency is 70 % to 85 %, switching frequency is 250 KHz, typ. Fifthly, in the Environmental Specifications, ambient operating temperature is -40°C to +85°C, storage temperature is - 55 °C to + 125 °C, derating could be seen in the graph, humidity is Up to 90 %, it has non condensing but has cooling Free air convection. Finally, in the Physical Characteristics, dimensions is 31,75 x 20,32 x 10,16 mm, or 1,25 x 0,80 x 0,40 inches, Weight is 19,0 g, case material has nickel coated copper.
      If you havw any problems about the P18TG-XXXXZ2:1M, you can all the telephone,+49 (0) 6135 931069, connect us through the telefax which number is +49 (0) 6135 931070 or you can also send e-mail to us, which address is info@peak-electronics.de. More informations in the website www.peak-electronics.de.