P048F048T24AL

Manufacturer: Vicor Corporation
Number of Outputs: 1
Applications: Commercial
Features: With Remote On/Off and UVLO
Mounting Type: Surface Mount
Package / Case: Module
Size / Dimension: 1.28" L x 0.87" W x 0.26" H (32.5mm x 22.0mm x 6.7mm)
Packaging: Tray
Operating Temperature: -40°C ~ 125°C
Series: V-I Chip™, PRM™
Type: Pre-Regulator Module
Voltage - Isolation: -
Voltage - Input (Min): 36V
Voltage - Input (Max): 75V
Voltage - Output: 48V
Current - Output (Max): 5A
Power (Watts) - Manufacture Series: 240W
Efficiency: 96%


Features:

• 48 V input V•I Chip PRM
• Vin range 36 75 Vdc
• High density 875 W/in³
• Small footprint 220 W/in²
• Low weight 0.5 oz (14 g)
• Adaptive Loop feedback
• ZVS buck-boost regulator
• 1.5 MHz switching frequency
• 96% Efficiency
• 125 operation


Pinout




Specifications

Parameter	Values	Unit
+In to -In	-1.0 to 85.0	Vdc
PC to -In	-0.3 to 6.0	Vdc
PR to -In	-0.3 to 9.0	Vdc
IL to -In	-0.3 to 6.0	Vdc
VC to -In	-0.3 to 18.0	Vdc
+Out to -Out	-0.3 to 59	Vdc
SC to -Out	-0.3 to 3.0	Vdc
VH to -Out	-0.3 to 9.5	Vdc
OS to -Out	-0.3 to 9.0	Vdc
CD to -Out	-0.3 to 9.0	Vdc
SG to -Out	100	mA
Continuous output current	5	Vdc
Continuous output power	240	W
Operating junction temperature(M-Grade) (T-Grade)	-55 to 125 -40 to 125
Storage temperature(M-Grade) (T-Grade)	-65 to 150 -40 to 150
Case temperature during reflow:	208

Description

The V•I Chip P048F048T24AL Pre-Regulator Module (PRM) is a very efficient non-isolated regulator capable of both boosting and bucking a wide range input voltage. P048F048T24AL is specifically designed to provide a controlled Factorized Bus distribution voltage for powering downstream V•I Chip Voltage Transformation Modules (VTMs) - fast, efficient, isolated, low noise Point-of-Load (POL) converters. In combination, PRMs and VTMs form a complete DC-DC converter subsystem offering all of the unique benefits of Vicor's Factorized Power Architecture (FPA): high density and efficiency; low noise operation; architectural flexibility; extremely fast transient response; and elimination of bulk capacitance at the Point-of-Load (POL).

In P048F048T24AL FPA systems, the POL voltage is the product of the Factorized Bus voltage delivered by the PRM and the "K-factor" (the fixed voltage transformation ratio) of a downstream VTM. The PRM controls the Factorized Bus
voltage to provide regulation at the POL. Because VTMs perform true voltage division and current multiplication, the Factorized Bus voltage may be set to a value that is substantially higher than the bus voltages typically found in "intermediate bus" systems, reducing distribution losses and enabling use of narrower distribution bus traces. A PRM-VTM chip set can provide up to 100 A or 230 W at a FPA system density of 200 A/in3 or 460 W/in3 - and because the PRM can be located, or "factorized," remotely from the POL, these power densities can be effectively doubled.

The P048F048T24AL PRM described in this data sheet features a unique "Adaptive Loop" compensation feedback: a single wire alternative to traditional remote sensing and feedback loops that enables precise control of an isolated POL voltage without the need for either a direct connection to the load or for noise sensitive, bandwidth limiting, isolation devices in the feedback path.