Features: SpecificationsDescription There are 3 OVLGS0CxB9 here, they are OVLGS0C6B9, OVLGS0C7B9, OVLGS0C8B9(X=6,7,8) . The OVLGS0CxB9 is a high intensity AIInGaP LED which is put in a clear plastic T-1¾ package. The system adopts an integral molded lens , and uses a narrow beam angle which...
OVLGS0CxB9: Features: SpecificationsDescription There are 3 OVLGS0CxB9 here, they are OVLGS0C6B9, OVLGS0C7B9, OVLGS0C8B9(X=6,7,8) . The OVLGS0CxB9 is a high intensity AIInGaP LED which is put in a clear plastic...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Features: SpecificationsDescription The OVLGB0CxB9 has four features.The first one is that the OVL...
There are 3 OVLGS0CxB9 here, they are OVLGS0C6B9, OVLGS0C7B9, OVLGS0C8B9(X=6,7,8) . The OVLGS0CxB9 is a high intensity AIInGaP LED which is put in a clear plastic T-1¾ package. The system adopts an integral molded lens , and uses a narrow beam angle which can provide an even emission pattern. This LED is useful in applications requiring higher on-axis brightness than that achievable with standard lamps, because it is designed to produce light over a wide range of drive currents.The features of OVLGS0CxB9 are as following mentioned: narrow beam angle, high luminous intensity, water clear plastic package and with red light(631nm).The OVLGS0CxB9 could be used in 1.indoor or outdoor applications; 2. message boards; 3. store front signage; 4. indicators.
There are some data for these three kinds: all of the three have some material --- AlInGaP, some emitted color --- red, and same lens color---water clear. The intensity typ.mcd of OVLGS0C6B9 is 6300, which of OVLGS0C7B9 is 8000, and OVLGS0C8B9's intensity typ.mcd is 10000.
When TA = 25 unless otherwise noted, OVLGS0CxB9's absolute maximum ratings : storage temperature range is from -40 to 100 , operating temperature range is from -40 to +85 , reverse voltage is 5 V, continuous forward current2 is 50 mA, peak forward current (10% duty cycle, 1KHz) is 100 mA, power dissipation is 120 mW, lead soldering temperature (3mm from the base of the epoxy bulb) is 260, and the electrostatic discharge is 2000V. There is a note here is solder time less than 5 seconds at temperature extreme.
When TA = 25 unless otherwise noted, the electrical characteristics of OVLGS0CxB9 is as following, symbol: Iv, parameter: luminous intensity, when IF = 20mA, OVLGS0C6B9's min is 4000, typ is 6300, OVLGO0C7B9's min is 5000, typ is 8000 , OVLGO0C8B9's min is 6300, typ is 10000. when IF = 20mA, symbol: VF, parameter is forward voltage, typ is 2.0, max is 2.4. when VR = 5V, symbol: IR, parameter is Reverse Current, max is 10.