OVLGO0CxB9

In our products, the OVLGO0CxB9 contains three kinds: they are OVLGO0C6B9 , OVLGO0C7B9, and OVLGO0C8B9. The OVLGO0CxB9 is mounted in a clear plastic T-1¾ package, and actually it is a high intensity AlInGaP LED . The system incorporates an integral molded lens and it can enables a narrow beam angle and provides an even emission pattern.This LED is useful in applications requiring higher on-axis brightness than that achievable with standard lamps, because OVLGO0CxB9 is designed to produce light over a wide range of drive currents.
The OVLGO0CxB9 could be used in these areas, such as indoor or outdoor applications, message boards, store front sgnage and indicators. The material of OVLGO0CxB9 is AlInGaP, the emitted color is orange, the intensity typ.mcd of OVLGO0C6B9 is 10000, the intensity typ.mcd of OVLGO0C7B9 is 12500, and OVLGO0C8B9 's intensity typ.mcd is 16000. And all the lens color is water clear.
The features of OVLGO0CxB9 are as following mentioned: narrow beam angle, high luminous intensity, water clear plastic package and orange(615nm).
When TA = 25 unless otherwise noted, its absolute maximum ratings : storage temperature range is from -40 to 100 , operating temperature range is from -40 to +85 , lead soldering temperature (3mm from the base of the epoxy bulb) is 260 , reverse voltage is 5 V, continuous forward current2 is 50 mA, peak forward current (10% duty cycle, 1KHz) is 100 mA, power dissipation is 120 mW, lead soldering temperature (3mm from the base of the epoxy bulb) is 260, and the electrostatic discharge is 2000V.
When TA = 25 unless otherwise noted, the electrical characteristics of OVLGO0CxB9 is as following, symbol: Iv, parameter: luminous intensity, when IF = 20mA, OVLGO0C6B9's min is 6300, typ is 10000, OVLGO0C7B9's min is 8000, typ is 12500, , OVLGO0C8B9's min is 10000, typ is 16000. when IF = 20mA, symbol: VF, parameter is forward voltage, typ is 2.0, max is 2.4. when VR = 5V, symbol: IR, parameter is Reverse Current, max is 10.