Photodiodes ST RECEPTACLE
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Product : | PIN Photodiodes | Reverse Voltage : | 100 V | ||
Maximum Dark Current : | 5 nA | Peak Wavelength : | 880 nm | ||
Rise Time : | 6 ns | Fall Time : | 6 ns |
The OPF422 consists of a hermetic PIN photodiode pre-mounted and aligned in an ST receptacle. This configuration is designed for PC board or panel mounting. Includes lock washer and jam nut, two 2-56 screws, and dust cap.The PIN Photodiodes are designed to interface with multimode optical fibers from 50/125 to 200/300 microns.
Features of the OPF422 are:(1)component pre-mounted and ready for use; (2)pre-tested with fiber to assure performance; (3)popular ST style receptacle.In cases where extremely high reliability is required (such as use in nuclear power control,aerospace and aviation, traffic equipment,medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by means of users' fail-safe precautions or other arrangement.
The absolute maximum ratings of the OPF422 can be summarized as:(1)reverse voltage:100 V;(2)storage temperature range:-55 to 125;(3)lead soldering temperature:240;(4)operating temperature:-40 to 100;(5)continuous forward current:200mA.The products described in this document are designed, developed and manufactured as contemplated for general use, including without limitation, ordinary industrial use, general office use, personal use, and household use, but are not designed, developed and manufactured as contemplated (1) for any use that includes fatal risks or dangers that, unless extremely high safety is secured, could have a serious effect to the public, and could lead directly to death, personal injury, severe physical damage or other loss (i.e., nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, mass transport control, medical life support system, missile launch control in weapon system), or (2) for any use where chance of failure is intolerable (i.e., submersible repeater and artificial satellite).
At present there is not too much information about this model.If you are willing to find more about OPF422, please pay attention to our web! We will promptly update the relevant information.
Technical/Catalog Information | OPF422 |
Vendor | TT Electronics/Optek Technology |
Category | Sensors, Sensor Evaluation Kits |
T073 Catalog Page | 0 [Nom] |
Other Names | OPF422 OPF422 |