Fiber Optic Transmitters, Receivers, Transceivers Fiber Optic LED 850nm 50mA
OPF372D: Fiber Optic Transmitters, Receivers, Transceivers Fiber Optic LED 850nm 50mA
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Reverse Voltage. | 1.0 V |
Continuous For ward Current. | 100 mA(4) |
Storage Tem perature Range | -55 to +100 |
Operating Tem perature Range | -40 to +85 |
Lead Sol dering Tem perature [1/16 inch (1.6 mm) from case for 5 sec. with sol deringiron] | 240(1) |
Notes:
(1) RMA flux is recommended. Duration can be extended to 10 sec. max when flow soldering.
(2) Graded index fiber, 50 mm core, N.A. = 0.20.
(3) To convert radiant power output to dBm, use the following expression dBm = 10 log (mW/1000).
(4) Derate linearly @ 1.0 mA/ above 25.
(5) Prebias @ 5 mA current.
LED Burn-in
All LED's are subject to 100% burn-in testing. Test conditions are 96 hours at 100 mA continuous current in 25 ambient.
The OPF372 series LED consists of a low cost plastic cap LED, pre-mounted and aligned in an ST* receptacle. This configuration is designed for PC board or panel mounting. Includes lock washer and jam nut, two 2-56 screws, and a dust cap.
The OPF372 series LED's are designed to interface with multimode optical fibers from 50/125 to 200/300 microns.
Technical/Catalog Information | OPF372D |
Vendor | TT Electronics/Optek Technology |
Category | Optoelectronics |
Connector Type | - |
Current - DC Forward (If) | 100mA |
Voltage - Forward (Vf) Typ | 2V |
Voltage - Reverse (Vr) (Max) | 1V |
Wavelength | 850nm |
Spectral Bandwidth | 35nm |
Capacitance | - |
Lead Free Status | Lead Free |
RoHS Status | RoHS Compliant |
Other Names | OPF372D OPF372D |