Features: SpecificationsDescription The OPB930W has the following features including 24 min 26AWG wire leads;Choice of aperture;Choice of output configuration;Choice of opaque or IR transmissive;shell material;Data rates to 250 kBaud;Side mount configuration. The OPB930W series of Photologic. Pho...
OPB930W: Features: SpecificationsDescription The OPB930W has the following features including 24 min 26AWG wire leads;Choice of aperture;Choice of output configuration;Choice of opaque or IR transmissive;sh...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
US $3.24 - 6.07 / Piece
Optical Switches, Transmissive, with Photo IC Output SLOTTED OPTIC SWITCH
The OPB930W has the following features including 24" min 26AWG wire leads;Choice of aperture;Choice of output configuration;Choice of opaque or IR transmissive;shell material;Data rates to 250 kBaud;Side mount configuration.
The OPB930W series of Photologic. Photo Integrated Circuit Switches provide optimum flexibility for the design engineer. Building from a standard housing with a 0.125" (3.18 mm) wide slot, the user can specify (1) type and polarity of TTL output, (2) discrete shell material, and (3) aperture width. Available with PC board mountable leads as OPB930L/OPB940L series.The electrical output can be specified as either TTL totem pole or TTL open collector. Either may be supplied with inverter or buffer output polarity. All have added stability of a built-in hysteresis amplifier.All housings are an opaque grade of injection-molded plastic to minimize the assempiy's sensitivity to ambient radiation, both visible and near-infrared. Discrete shells (exposed on the parallel faces inside the device throat)are either IR transmissive plastic for applications where aperture contamination may occur or opaque plastic for maximum protection against ambient light.
The information of OPB930W provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
At present there is not too much information about this model.If you are willing to find more about OPB930W, please pay attention to our web! We will promptly update the relevant information.