SENS OPTO SLOT 3.18MM TRANS C-MT
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Series: | - | Manufacturer: | TT Electronics/Optek Technology | ||
Sensing Distance: | 0.125" (3.18mm) | Sensing Method: | Transmissive | ||
Output Configuration: | Phototransistor | Package / Case : | HVQFN EP | ||
Current - DC Forward (If): | 50mA | Current - Collector (Ic) (Max): | 30mA | ||
Voltage - Collector Emitter Breakdown (Max): | 30V | Response Time: | - | ||
Mounting Type: | Chassis Mount | Package / Case: | Module, Pre-Wired |
The OPB829A belongs to OPB829 series which consists of an infrared emitting diode and an NPN silicon phototransistor mounted on opposite sides of a. 125" (3.18 mm) wide slot and it has a IR transmissive housing. The OPB829B has an transmissive housing with an 0.010" (0.254 mm) aperture located in front of the phototransistor. The OPB829D has an opaque housing with a molded 0.010" (0.254 mm) aperture located in front of the phototransistor. Phototransistor switching takes place whenever an opaque object passes through the slot. The OPB829C has an opaque housing with a molded 0.060" (1.52 mm) aperture located in front of the phototransistor.
The features of OPB829A can be summarized as (1)24" min. #26 AWG wire leads; (2)0.125" (3.18 mm) wide slot; (3)inexpensive plastic housing.
The absolute maximum ratings of OPB829A are (1)storage and operating temperature range: -40°C to +80°C; (2)lead soldering temperature [1/16 inch (1: 6 mm) from iron]: 240°C(RMA flux is recommended. duration can be extended to 10sec. max. when flow soldering); (3)forward DC current: 50mA; (4)peak forward current (1s pulse width, 300 pps):3.0A; (5)reverse DC voltage: 2.0V; (6)power dissipation: 100mW(derate linearly 1.67mW/°C above 250°C); (7)collector-emitter voltage: 30V; (8)emitter-collector voltage: 5.0V; (9)collector DC current: 30mA; (10)power dissipation: 100mW.
Technical/Catalog Information | OPB829A |
Vendor | TT Electronics/Optek Technology |
Category | Sensors, Transducers |
Sensing Distance | 0.125" (3.18mm) |
Sensing Method | Transmissive |
Voltage - Collector Emitter Breakdown (Max) | 30V |
Current - Collector (Ic) (Max) | 30mA |
Current - DC Forward (If) | 50mA |
Output Configuration | Phototransistor |
Response Time | - |
Type | Unamplified |
Mounting Type | Chassis Mount, Wire Lead |
Package / Case | Pre-Leaded |
Packaging | Bulk |
Operating Temperature | -40°C ~ 80°C |
Lead Free Status | Lead Free |
RoHS Status | RoHS Non-Compliant |
Other Names | OPB829A OPB829A |