Optical Switches, Transmissive, with Phototransistor Output Slotted Opt Switch Dual Channel
OPB826S: Optical Switches, Transmissive, with Phototransistor Output Slotted Opt Switch Dual Channel
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The OPB826S and OPB826SD each consist of two infrared emitting diodes and two NPN silicon phototransistors mounted in an over/under configuration on opposite sides of a 0.100" (2.54 mm) wide slot. Dual channels enable direction of travel sensing. The low cost IR transmissive plastic housing reduces possible interference from ambient light and provides dust and dirt protection. Phototransistor switching takes place when an opaque object passes through the slot. The OPB826S has 0.010" (0.25 mm) by 0.040" (1.02 mm) apertures in front of both phototransistors. The OPB826SD has the same sized apertures in front of both phototransistors and both emitters.
The features of OPB826S can be summarized as (1)dual channels over/under; (2)direction of travel sensing; (3)Single or double apertures for high resolution; (4)0.100" (2.54 mm) wide slot; (5)OPB826S (apertures on sensors only); (6)OPB826SD (apertures on both emitters and sensors).
The absolute maximum ratings of OPB826S are (1)storage and operating temperature: -40 to +85°C; (2)lead soldering temperature [1/16 inch (1.6 mm) from case for 5 sec. with soldering iron]: 240°C(RMA flux is recommended. Duration can be extended to 10 sec. max when flow soldering.); (3)forward DC current: 40 mA; (4)peak forward current (1 us pulse width, 300 pps): 3.0 A; (5)reverse DC voltage: 2.0V; (6)power dissipation: 100 mW(2: Derate linearly 1.33mW/°C above 25°C); (7)collector-emitter voltage: 5.0V; (8)power dissipation: 100mW(3: derate linearly 2.0mW/°C above 25°C); (9)collector DC current: 30mA.
Technical/Catalog Information | OPB826S |
Vendor | TT Electronics/Optek Technology |
Category | Sensors, Transducers |
Sensing Distance | 0.090" (2.29mm) |
Sensing Method | Transmissive |
Voltage - Collector Emitter Breakdown (Max) | 30V |
Current - Collector (Ic) (Max) | 30mA |
Current - DC Forward (If) | 40mA |
Output Configuration | 2 NPN |
Response Time | - |
Type | Unamplified |
Mounting Type | Through Hole |
Package / Case | PCB Mount |
Packaging | Bulk |
Operating Temperature | -40°C ~ 85°C |
Lead Free Status | Lead Free |
RoHS Status | RoHS Compliant |
Other Names | OPB826S OPB826S |