Optical Switches, Transmissive, with Phototransistor Output Slotted Opt Switch Dual Channel
OPB822S: Optical Switches, Transmissive, with Phototransistor Output Slotted Opt Switch Dual Channel
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The OPB822S and OP8822SD each consist of two infrared emitting diodes and two NPN silicon phototransistors mounted in a "side-by-side" configuration on opposite sides of a 0.090" (2.29 mm) wide slot. The low cost IR transmissive plastic housing reduces possible interference from ambient light and provides dust and dirt protection. Dual channel (overlunder) configuration available as OPB826 series. Phototransisior switching takes place whenever an opaque object passes through the device slot, The OPSB22S has 0.010" (0.25 mm) by 0.080" (2.03 mm) apertures in front of both phototransistors. The OPB8225D has the same sized apertures in front of both phototransistors and both emitters. Dual channels enable direction of travel sensing.
The features of OPB822S can be summarized as (1)dual channels side-by-side; (2)0.090" (2.29 mm) wide slot; (3)mon-contact switching; (4)single or double apertures for high resolution; (5)OPB822S (apertures on sensors only); (6)OPB8225D (apertures on both emitters and sensors).
The absolute maximum ratings of OPB822S are (1)storage and operating temperature: -40 to +85°C; (2)lead soldering temperature [1/16 inch (1.6 mm) from case for 5 sec. with soldering iron]: 240°C(RMA flux is recommended. Duration can be extended to 10 sec. max when flow soldering.); (3)continous forward current:50mA; (4)peak forward current(1s pulse width, 300pps): 3.0A; (5) power dissipation: 100mW; (6) collector-emitter voltage: 30V; (7)emitter-collector voltge: 5.0V; (8)power disspation: 100mW(Derate linearly 1.67mW/°C above 25°C).
Technical/Catalog Information | OPB822S |
Vendor | TT Electronics/Optek Technology |
Category | Sensors, Transducers |
Sensing Distance | 0.090" (2.29mm) |
Sensing Method | Transmissive |
Voltage - Collector Emitter Breakdown (Max) | 30V |
Current - Collector (Ic) (Max) | 30mA |
Current - DC Forward (If) | 50mA |
Output Configuration | 2 NPN |
Response Time | - |
Type | Unamplified |
Mounting Type | Through Hole |
Package / Case | PCB Mount |
Packaging | Bulk |
Operating Temperature | -40°C ~ 85°C |
Lead Free Status | Lead Free |
RoHS Status | RoHS Compliant |
Other Names | OPB822S OPB822S |