OPB818

Series: -
Sensing Method: Transmissive
Output Configuration: Phototransistor
Mounting Type: Through Hole
Package / Case: PCB Mount
Voltage - Collector Emitter Breakdown (Max): 30V
Current - DC Forward (If): 50mA
Packaging: Bulk
Current - Collector (Ic) (Max): -
Manufacturer: TT Electronics/Optek Technology
Response Time: -
Sensing Distance: 0.210" (5.33mm)


Description

The OPB818 consists of an infrared emitting diode and an NPN silicon phototransistor mounted in a low cost black plastic housing on opposite sides of a 0.200" (5.08 mm) wide slot.Phototransistor switching takes place whenever an opaque object passes through the slot. The OPB818 is designed for direct soldering into PC Boards or mounting in standard dual-in-line sockets.

Features of the OPB818 are:(1)non-contacting switching; (2)for direct pc board or dual-in-line socket mounting; (3)0.400" (10.16 mm) lead spacing; (4)0.200" (5.08 mm) wide slot.In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user's units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets.

The absolute maximum ratings of the OPB818 can be summarized as:(1)collector-emitter voltage:30 V;(2)storage temperature range:-65 to 150;(3)collector to emitter voltage:30V;(4)power dissipation:100mW;(5)continuous forward current:3.0A;(6)lead soldering temperature:240.The products described in this document are designed, developed and manufactured as contemplated for general use, including without limitation, ordinary industrial use, general office use, personal use, and household use, but are not designed, developed and manufactured as contemplated (1) for any use that includes fatal risks or dangers that, unless extremely high safety is secured, could have a serious effect to the public, and could lead directly to death, personal injury, severe physical damage or other loss (i.e., nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, mass transport control, medical life support system, missile launch control in weapon system), or (2) for any use where chance of failure is intolerable (i.e., submersible repeater and artificial satellite).

At present there is not too much information about this model.If you are willing to find more about OPB818, please pay attention to our web! We will promptly update the relevant information.

Parameters:

Technical/Catalog Information	OPB818
Vendor	TT Electronics/Optek Technology
Category	Sensors, Transducers
Sensing Distance	0.210" (5.33mm)
Sensing Method	Transmissive
Voltage - Collector Emitter Breakdown (Max)	30V
Current - Collector (Ic) (Max)	-
Current - DC Forward (If)	50mA
Output Configuration	Phototransistor
Response Time	-
Type	Unamplified
Mounting Type	Through Hole
Package / Case	PCB Mount
Packaging	Bulk
Operating Temperature	-40°C ~ 85°C
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	OPB818 OPB818 365 1019 ND 3651019ND 365-1019