Features: ·0.125 (3.18 mm) wide gap·24 minimum, 26 AWG wire leads·Choice of aperture ·Choice of opaque or IR transmissive shell material·Choice of mounting configuration·Choice of lead spacingSpecificationsStorage and Op erating Tem perature Range . . . . . . . . . . . . . . . . . -40 to +80(1)I...
OPB380: Features: ·0.125 (3.18 mm) wide gap·24 minimum, 26 AWG wire leads·Choice of aperture ·Choice of opaque or IR transmissive shell material·Choice of mounting configuration·Choice of lead spacingSpec...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Storage and Op erating Tem perature Range . . . . . . . . . . . . . . . . . -40 to +80(1)
In put Di ode
For ward DC Cur rent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA
Peak For ward Cur rent (1 ms pulse width, 300 pps) . . . . . . . . . . . . . . . . . . . . . 3.0 A
Re verse DC Volt age. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.0 V
Power Dis sipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 00 mW(1)
Out put Pho to tran sis tor
Collector- Emitter Volt age. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 V
Emitter- Collector Volt age . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5.0 V
Collector DC Cur rent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 mA
Power Dis sipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mW(1)
The OPB380/390 series of slotted switches provides the design engineer with the flexibility of a custom device from a standard product line. Building from a standard housing with a 0.125" (3.18 mm) wide slot, the user can specify (1) electrical output parameters, (2) mounting tab configuration, (3) discrete shell material, and (4) aperture width.
All housings of OPB380/390 are an opaque grade of injection-molded plastic to minimize the assembly's sensitivity to ambient radiation, both visible and near-infrared.Discrete shells (exposed only on the parallel faces inside the device throat) are either IR transmissive plastic for applications where aperture contamination may occur or opaque plastic with aperture openings for maximum protection against ambient light.