Operational Amplifiers - Op Amps Hi-Power Monolithic Op Amp
OPA541AP: Operational Amplifiers - Op Amps Hi-Power Monolithic Op Amp
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Number of Channels : | 1 | Common Mode Rejection Ratio (Min) : | 95 dB | ||
Input Offset Voltage : | 10 mV | Input Bias Current (Max) : | 50 pA | ||
Operating Supply Voltage : | 70 V | Mounting Style : | Through Hole | ||
Package / Case : | TO-220 | Slew Rate : | 10 V/us | ||
Shutdown : | No | Output Current : | 10 A | ||
Maximum Operating Temperature : | + 85 C | Packaging : | Tube |
The OPA541AP is designed as one kind of high power monolithic operational amplifier that can be used in (1)motor driver; (2)servo amplifier; (3)synchro excitation; (4)audio amplifier; (5)programmable power supply. This device uses a single current-limit resistor to set both the positive and negative current limits and is available in an 11-pin power plastic package and an industry-standard 8-pin TO-3 hermetic package.
Features of the OPA541AP are:(1)power supplies to ±40V; (2)output current to 10a peak; (3)programmable current limit; (4)industry-standard pin out; (5)fet input; (6)to-3 and low-cost power plastic packages. The absolute maximum ratings of the OPA541AP can be summarized as:(1)Supply Voltage, +VS to VS: 80 V;(2)Output Current: see SOA;(3)Power Dissipation, Internal: 125 W;(4)Input Voltage: ±VS;(5)Temperature (Pin solder, 10s): +300°C;(6)Temperature (Junction): +150°C.
The electrical characteristics of the OPA541AP can be summarized as:(1)Common-Mode Voltage Range: ±(|VS|-6) to ±(|VS|-3) V;(2)Common-Mode Rejection: 113 dB;(3)Input Capacitance: 5 pF;(4)Input Impedance, DC: 1 T;(5)Open Loop Gain at 10Hz: 90 to 97 dB;(6)Open Loop Gain at 10Hz: 1.6 MHz;(7)Slew Rate: 6 to 10 V/us;(8)Power Bandwidth: 45 to 55 kHz. If you want to know more information such as the electrical characteristics about the OPA541AP, please download the datasheet in www.seekic.com or www.chinaicmart.com .
Technical/Catalog Information | OPA541AP |
Vendor | Texas Instruments |
Category | Integrated Circuits (ICs) |
Packaging | Tube |
Amplifier Type | Power |
Number of Circuits | 1 - Single |
Package / Case | TO-220-11 (Bent and Staggered Leads) |
Slew Rate | 10 V/s |
Gain Bandwidth Product | 1.6MHz |
Current - Supply | 20mA |
Current - Output / Channel | 10A |
Voltage - Supply, Single/Dual (±) | 20 V ~ 70 V, ±10 V ~ 35 V |
Output Type | - |
-3db Bandwidth | - |
Current - Input Bias | 4pA |
Operating Temperature | -25°C ~ 85°C |
Voltage - Input Offset | 2000V |
Drawing Number | 296; 4202503/B; KV; 11 |
Lead Free Status | Lead Free |
RoHS Status | RoHS Compliant |
Other Names | OPA541AP OPA541AP |