Features: `RAIL-TO-RAIL INPUT
`RAIL-TO-RAIL OUTPUT (within 10mV) W
`IDE BANDWIDTH: 38MHz
`HIGH SLEW RATE: 22V/s
`LOW NOISE: 5nV/Hz
`LOW THD+NOISE: 0.0006%
`UNITY-GAIN STABLE
`MicroSIZE PACKAGES
`SINGLE, DUAL, AND QUAD
Application·CELL PHONE PA CONTROL LOOPS
·DRIVING A/D CONVERTERS
·VIDEO PROCESSING
·DATA ACQUISITION
·PROCESS CONTROL
·AUDIO PROCESSING
·COMMUNICATIONS
·ACTIVE FILTERS
·TEST EQUIPMENTPinout
SpecificationsSupply Voltage...............................................................................5.5V
Signal Input Terminals, Voltage(2)..................(V-) -0.3V to (V+) + 0.3V
Current(2)....................................................10mA
Output Short Circuit(3).........................................................Continuous
Operating Temperature.................................................-50 to +125
Storage Temperature....................................................-50 to +125
Junction Temperature....................................................................150
Lead Temperature (soldering, 10s)...............................................300
NOTES: (1) Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may de- grade device reliability. (2) Input terminals are diode-clamped to the power supply rails. Input signals that can swing more than 0.3V beyond the supply rails should be current-limited to 10mA or less. (3) Short circuit to ground, one amplifier per package.
DescriptionOPA350 series rail-to-rail CMOS operational amplifi- ers are optimized for low voltage, single-supply opera- tion. Rail-to-rail input/output, low noise (5nV/Hz ), and high speed operation (38MHz, 22V/s) make them ideal for driving sampling analog-to-digital converters. They are also well suited for cell phone PA control loops and video processing (75 drive capability) as well as audio and general purpose applications. Single, dual, and quad versions have identical specifications for maximum design flexibility.
The OPA350 series operates on a single supply as low as 2.5V with an input common-mode voltage range that extends 300mV below ground and 300mV above the positive supply. Output voltage swing is to within 10mV of the supply rails with a 10k? load. Dual and quad designs feature completely independent circuitry for low- est crosstalk and freedom from interaction.
The single (OPA350) and dual (OPA2350) come in the miniature MSOP-8 surface mount, SO-8 surface mount, and 8-pin DIP packages. The quad (OPA435 ) packages are the space-saving SSOP-16 surface mount and SO-14 surface mount. All are specified from -40 to +85 and operate from -50 to +125.
OPA4350 Data Sheet
