OPA4347

Supply Voltage, V+ to V-.................................................................7.5V
Signal Input Terminals, Voltage⁽²⁾..................(V-) - 0.5V to (V+) + 0.5V
                                     Current⁽²⁾.................................................10mA
Output Short-Circuit⁽³⁾.........................................................Continuous
Operating Temperature...................................................65 to +150
Storage Temperature.....................................................-65 to +150
Junction Temperature.....................................................................150
Lead Temperature (soldering, 10s)................................................300


NOTES: (1) Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may degrade device reliability. These are stress ratings only. Functional opera- tion of the device at these conditions, or beyond the specified operating conditions, is not implied. (2) Input terminals are diode-clamped to the poer-supply rails. Input signals that can swing more than 0.5V beyond the supply rails should be current-limited to 10mA or less. (3) Short-circuit to ground, one amplifier per package.

The OPA347 is a microPower, low-cost operational amplifier available in  micropackages. The OPA347 (single version) is available in the SC-70 and SOT23-5 packages. The OPA2347 (dual version) is available in the SOT23-8 and WCSP-8 packages. Both are also available in the SO-8. The OPA347 is also available in the DIP-8. The OPA4347 (quad) is available in the SO-14 and the TSSOP-14.

The small size and low power consumption (34A per chan- nel maximum) of the OPA347 make it ideal for portable and battery-powered applications. The input range of the OPA347 extends 200mV beyond the rails, and the output range is within 5mV of the rails. The OPA347 also features an excellent speed/power ratio with a bandwidth of 350kHz.

The OPA347 can be operated with a single or dual power supply from 2.3V to 5.5V. All models are specified for operation from -55 to +125.