OPA355

Supply Voltage, V+ to V-................................................................... 7.5V
Signal Input Terminals, Voltage⁽²⁾ .................... (V-) -0.5V to (V+) + 0.5V
                                   Current⁽²⁾ ....................................................10mA
Enable Input.......................................................(V-) -0.5V to (V+) + 0.5V
Output Short-Circuit⁽³⁾ ...........................................................Continuous
Operating Temperature....................................................-55 to +150
Storage Temperature...................................................... -65 to +150
Junction Temperature.....................................................................+160
Lead Temperature (soldering, 10s)................................................+300


NOTES: (1) Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those specified is not implied. (2) Input terminals are diode-clamped to the power-supply rails. Input signals that can swing more than 0.5V beyond the supply rails should be current limited to 10mA or less. (3) Short-circuit to ground, one amplifier per package.

The OPA355 series high-speed, voltage-feedback CMOS operational amplifiers are designed for video and other applications requiring wide bandwidth. The OPA355 is unity- gain stable and can drive large output currents. In addition, the OPA355 has a digital shutdown (Enable) function. This feature provides power savings during idle periods and places the output in a high-impedance state to support output multiplexing. Differential gain is 0.02% and differential phase is 0.05?. Quiescent current is only 8.3mA per channel.

The OPA355 is optimized for operation on single or dual supplies as low as 2.5V (?1.25V) and up to 5.5V (?2.75V). Common-mode input range for the OPA355 extends 100mV below ground and up to 1.5V from V+. The output swing is within 100mV of the rails, supporting wide dynamic range.

The OPA355 series is available in single (SOT23-6 and SO-8), dual (MSOP-10), and triple (TSSOP-14 and SO-14) versions. Multichannel versions feature completely indepen- dent circuitry for lowest crosstalk and freedom from interac- tion. All are specified over the extended -40 to +125 range.