Features: `RAIL-TO-RAIL INPUT AND OUTPUT SWING`MicroSIZE PACKAGES `BANDWIDTH: 5.5MHz`SLEW RATE: 6V/ /s `QUIESCENT CURRENT: 750A/Chan`POWER SHUTDOWN MODEApplication·SENSOR BIASING ·SIGNAL CONDITIONING ·DATA ACQUISITION ·PROCESS CONTROL ·ACTIVE FILTERS ·TEST EQUIPMENTPinoutSpecificationsSupply Volta...
OPA341: Features: `RAIL-TO-RAIL INPUT AND OUTPUT SWING`MicroSIZE PACKAGES `BANDWIDTH: 5.5MHz`SLEW RATE: 6V/ /s `QUIESCENT CURRENT: 750A/Chan`POWER SHUTDOWN MODEApplication·SENSOR BIASING ·SIGNAL CONDITIONIN...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
US $.5 - .51 / Piece
Operational Amplifiers - Op Amps Hi-Speed Low Noise Single Supply CMOS
Supply Voltage, V+ to V-.................................................................6.0V
Input Voltage Range(2)...................................(V-) -0.5V to (V+) + 0.5V
Input Terminal(3) ..........................................................................10mA
Output Short Circuit(3) .........................................................Continuous
Operating Temperature..................................................-55 to +150
Storage Temperature.....................................................-65 to +150
Junction Temperature.....................................................................150
Lead Temperature (soldering, 10s)................................................300
NOTES: (1) Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may de- grade device reliability. (2) Input terminals are diode-clamped to the power supply rails. Input signals that can swing more than 0.5V beyond the supply rails should be current-limited to 10mA or less. (3) Short-circuit to ground, one amplifier per package.
The OPA341 series rail-to-rail CMOS operational amplifiers are designed for low-cost, miniature applications. They are optimized for low-voltage, single-supply operation. Rail-to-rail input and output and high-speed operation make them ideal for driving sampling Analog-to-Digital (A/D) converters.
The power-saving shutdown feature makes the OPA341 ideal for portable low-power applications. The OPA341 series is also well suited for general-purpose and audio applications as well as providing I/V conversion at the output of Digital-to-Analog (D/A) converters. Single and dual versions have identical specifications for design flex- ibility.
The OPA341 series operate on a single supply as low as 2.5V, and input common-mode voltage range extends 300mV beyond the supply rails. Output voltage swings to within 1mV of the supply rails with a 100k load. The OPA341 series offers excellent dynamic response (BW = 5.5MHz, SR = 6V/s) with a quiescent current of only 750A. The dual design features completely independent circuitry for lowest crosstalk and free- dom from interaction.
The single (OPA341) packages are the tiny SOT23-6 surface mount and SO-8 surface mount. The dual (OPA2341) comes in the miniature MSOP-10 surface mount. All are specified from -55 to +125 and operate from -55 to +150. The OPA343 provides similar performance without shut- down capability.