OP467

Features:

High Slew Rate 170 V/s
Wide Bandwidth 28 MHz
Fast Settling Time <200 ns to 0.01%
Low Offset Voltage <500 mV
Unity-Gain Stable
Low Voltage Operation 65 V to 615 V
Low Supply Current <10 mA
Drives Capacitive Loads




Application

High Speed Image Display Drivers
High Frequency Active Filters
Fast Instrumentation Amplifiers
High Speed Detectors
Integrators
Photo Diode Preamps




Pinout








Specifications



Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . .±18 V
Input Voltage² . . . . . . . . . . . . . . . . . . . . . . . . . . . . .±18 V
Differential Input Voltage² . . . . . . . . . . . . . . . . . . . ±26 V
Output Short-Circuit Duration . . . . . . . . . . . . . . . ..Limited
Storage Temperature Range
Y, RC Packages . . . . . . . . . . . . . . . . . . . 65°C to +175°C
P, S Packages . . . . . . . . . . . . . . . . . . . . 65°C to +150°C
Operating Temperature Range
OP467A . . . . . . . . . . . . . . . . . . . . . . . . . 55°C to +125°C
OP467G . . . . . . . . . . . . . . . . . . . . . . . . . . 40°C to +85°C
Junction Temperature Range
Y, RC Packages . . . . . . . . . . . . . . . . . . . .65°C to +175°C
P, S Packages . . . . . . . . . . . . . . . . . . . . .65°C to +150°C
Lead Temperature Range (Soldering, 60 sec) . . . . +300°C




Description

The OP467 is a quad, high speed, precision operational amplifier.It offers the performance of a high speed op amp combined with the advantages of a precision operational amplifier all in a single package. The OP467 is an ideal cho-ice for applications where, traditionally, more than one op amp was used to achieve this level of speed and precision.

The OP467's internal compensation ensures stable unity-gain operation, and it can drive large capacitive loads with-out oscillation. With a gain bandwidth product of 28 MHz driving a 30 pF load, output slew rate in excess of 170 V/ms, and settling time to 0.01% in less than 200 ns, the OP467 provides excellent dynamic accuracy in high speed data-acquisition systems. The channel-to-channel separation is typically 60 dB at 10 MHz.

The dc performance of OP467 includes less than 0.5 mV of offset, voltage noise density below 6 nV/ÖHz and total su-pply current under 10 mA. Common-mode rejection and power supply rejection ratios are typically 85 dB. PSRR is mai-tained to better than 40 dB with input frequencies as high as 1 MHz. The low offset and drift plus high speed and low noise, make the OP467 usable in applications such as high speed detectors and instrumentation.

The OP467 is specified for operation from ±5 V to ±15 V over the extended industrial temperature range (40°C to +85°C) and is available in 14-lead plastic and ceramic DIP, plus SOL-16 and 20-lead LCC surface mount packages.
Contact your local sales office for MIL-STD-883 data sheet and availability.