Function: Tri-State (Output Enable)
Operating Temperature: -40°C ~ 85°C
Ratings: -
Mounting Type: Surface Mount
Packaging: Tape & Reel (TR)
Frequency Stability: ±100ppm
Current - Supply (Max): 70mA
Series: -
Manufacturer: RFM
Output: -
Type: VCSO (SAW)
Package / Case: 8-SMD
Voltage - Supply: 3.13V ~ 5.25V
Size / Dimension: 0.530" L x 0.360" W (13.46mm x 9.14mm)
Height: 0.076" (1.93mm)
Frequency: 669.327MHz
Features: • Quartz SAW Stabilized and Filtered "Diff Sine" Technology
• Fundamental-Mode Oscillation at 669.327 MHz
• Voltage Tunable for Phase Lock Loop Operations
• Optical Timing Reference for Forward Error Correction ApplicationsSpecificationsCharacteristic Symbol Minimum Typical Maximum Units Operating Frequency Absolute Frequency fO 669.327 MHz Tune Range 100 ppm Tune Voltage 0 +3 V Tuning Linearity 3 % Tuning Sensitivity df/dv 140 300 ppm/V Modulation Bandwidth 125 265 kHz Q and Q Output Voltage into 50 Ohm (VSWR?1.2) VO 0.60 1.1 VP-P Operating Load VSWR 2:1 VP-P Symmetry 49 51 % Harmonic Spurious -30 dBc Nonharmonic Spurious -60 dBc Phase Noise @100 Hz offset -75 dBc/Hz Phase Noise @ 1 kHz offset -105 dBc/Hz Phase Noise @ 10 k offset -125 dBc/Hz Noise Floor -155 dBc/Hz Q and Q Jitter RMS Jitter 2 psP-P No Noise on VCC 12 psP-P with 200 mVP-P noise added from 1 MHz to fO 12 psP-P Output DC Resistance (between Q & Q) 50 KOhm DC Power Supply Operating Voltage VCC 3.13 3.3 5.0 5.25 Vdc Operating Current ICC 70 mA Operating Case Temperature TC -40 +85 C
Rating |
Value |
Units |
DC Suppy Voltage |
0 to 5.5 |
Vdc |
Tuning Voltage |
0 to 6 |
Vdc |
Case Temperature |
-55 to 100 |
°C |
DescriptionOP4008B Quartz SAW Stabilized and Filtered Diff Sine Technology Fundamental-Mode Oscillation at 669.327 MHz Voltage Tunable for Phase Lock Loop Operations Optical Timing Reference for Forward Error Correction Applications
The output of this device OP4008B is generated and filtered by narrow-band quartz SAW elements at 669.327 MHz. The con-figuration of this clock OP4008B provides a pure signal for optical timing applications in noisy signal environ-ments. The OP4008B Q/Q differential output swing of ±1 volt about 0 Vdc has symmetry better than ±1% into loads from40 to 70 ohms, dete-rmined by customer application. The long term frequency accuracy is set by an external reference source allowing this device to complete a Phase Lock Loop design without the usual noise and jitter problems associated with PLL's.