OP4006B1

Function: Tri-State (Output Enable)
Operating Temperature: -40°C ~ 85°C
Ratings: -
Mounting Type: Surface Mount
Packaging: Tape & Reel (TR)
Frequency Stability: ±100ppm
Current - Supply (Max): 70mA
Series: -
Manufacturer: RFM
Output: -
Type: VCSO (SAW)
Package / Case: 8-SMD
Voltage - Supply: 3.13V ~ 5.25V
Size / Dimension: 0.530" L x 0.360" W (13.46mm x 9.14mm)
Height: 0.076" (1.93mm)
Frequency: 666.51MHz


Features:

• Quartz SAW Stabilized Differential Output Technology
• Very Low Jitter Fundamental-Mode Operation at 666.51 MHz
• Voltage Tunable for Phase Locked Loop Applications
• Optical Timing Reference for Forward Error Correction Applications




Specifications

Characteristic Symbol Minimum Typical Maximum Units Operating Frequency Absolute Frequency fO 666.51 MHz Tuning Range 100 ppm Tuning Voltage 0 3.3 Vdc Tuning Linearity 5 % Modulation Bandwidth 50 kHz Q and Q Output Voltage into 50 Ohm (VSWR ? 1.2) VO 0.60 1.1 VP-P Operating Load VSWR 2:1 VP-P Symmetry 49 51 % Harmonic Spurious -15 dBc Nonharmonic Spurious -60 dBc Phase Noise @ 100 Hz offset -70 dBc/Hz Phase Noise @ 1 kHz offset -100 dBc/Hz Phase Noise @ 10 kHz offset -125 dBc/Hz Noise Floor -150 dBc/Hz Q and Q Jitter RMS Jitter 1 ps No Noise on VCC 12 psP-P 200 mVP-P Noise from 1 MHz to fO on VCC 12 psP-P Output DC Resistance (between Q & Q) 50 KOhm DC Power Supply Operating Voltage VCC 3.13 3.3 or 5.0 5.25 Vdc Operating Current ICC 70 mA Operating Case Temperature TC -40C +85C C

Rating	Value	Units
DC Suppy Voltage	0 to 5.5	Vdc
Tuning Voltage	0 to 6	Vdc
Case Temperature	-55 to 100	°C

Description

OP4006B1 Quartz SAW Stabilized Differential Output Technology Very Low Jitter Fundamental-Mode Operation at 666.51 MHz Voltage Tunable for Phase Locked Loop Applications Optical Timing Reference for Forward Error Correction Applications

The OP4006B1 is a voltage-controlled SAW clock (VCSC) designed for phase-locked loop (PLL) applications in optical data communications systems. The differential outputs of the OP4006B1 are generated by high-Q, fundamental mode quartz surface acoustic wave (SAW) technology. This technique provides very low output jitter and phase noise, plus excellent immunity to power supply noise. The OP4006B1 differential outputs feature ±1% symmetry, and can be DC-configured to drive a wide range of high-speed logic families. The OP4006B1 is packaged in a hermetic metal-ceramic LCC.