Function: Tri-State (Output Enable)
Operating Temperature: -40°C ~ 85°C
Ratings: -
Mounting Type: Surface Mount
Packaging: Tape & Reel (TR)
Frequency Stability: ±100ppm
Current - Supply (Max): 70mA
Series: -
Manufacturer: RFM
Output: -
Frequency: 622.08MHz
Type: VCSO (SAW)
Package / Case: 8-SMD
Voltage - Supply: 3.13V ~ 5.25V
Size / Dimension: 0.530" L x 0.360" W (13.46mm x 9.14mm)
Height: 0.080" (2.03mm)
Features: Quartz SAW Stabilized Differential Output Technology
Very Low Jitter Fundamental-Mode Operation at 622.08 MHz
Voltage Tunable for Phase Locked Loop Applications
Timing Reference for Optical Data Communications SystemsSpecificationsCharacteristic Symbol Minimum Typical Maximum Units Operating Frequency Absolute Frequency fO 622.08 MHz Tuning Range 100 ppm Tuning Voltage 0 3.3 Vdc Tuning Linearity 5 % Modulation Bandwidth 200 kHz Q and Q Output Voltage into 50 Ohm (VSWR ? 1.2) VO 0.60 1.1 VP-P Operating Load VSWR 2:1 VP-P Symmetry 45 55 % Harmonic Spurious -15 dBc Nonharmonic Spurious -60 dBc Phase Noise @ 100 Hz offset -70 dBc/Hz Phase Noise @ 1 kHz offset -100 dBc/Hz Phase Noise @ 10 kHz offset -125 dBc/Hz Noise Floor -150 dBc/Hz Q and Q Jitter RMS Jitter (10kHz to 80MHz) 0.1 ps No Noise on VCC 12 psP-P 200 mVP-P Noise from 1 MHz to fO on VCC 12 psP-P Input Impedence (Tuning Port) 8 10 KOhm Output DC Resistance (between Q & Q) 50 KOhm DC Power Supply Operating Voltage VCC 3.13 3.3 or 5.0 5.25 Vdc Operating Current ICC 70 mA Operating Case Temperature TC -40C +85C C
Rating
|
VDS |
RDS(ON) |
DC Suppy Voltage
Tune Voltage
Case Temperature |
0 to 5.5
0 to 5.5
-55 to 100 |
Vdc
Vdc
°C |
DescriptionThe OP4005B1 is a voltage-controlled SAW clock (VCSC) designed for phase-locked loop (PLL) applications in optical data communications systems. The differential outputs of the OP4005B1 are generated by high-Q, fundamental mode quartz surface acoustic wave (SAW) technology. This technique provides very low output jitter and phase noise, plus excellent immunity to power supply noise. The OP4005B1 differential outputs feature ±1% symmetry, and can be DC-configured to drive a wide range of high-speed logic families. The OP4005B1 is packaged in a hermetic metal-ceramic LCC.