IC OPAMP GP 4MHZ DUAL 8SOIC
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Series: | - | Manufacturer: | Analog Devices Inc | ||
Amplifier Type: | General Purpose | Type: | - | ||
Number of Circuits: | 2 | Max Output Power x Channels @ Load: | - | ||
Output Type: | - | Slew Rate: | 4 V/µs | ||
Voltage - Supply: | - | Features: | - | ||
Gain Bandwidth Product: | 4MHz | -3db Bandwidth: | - | ||
Package / Case : | SOP-8 | Current - Input Bias: | 375nA | ||
Voltage - Input Offset: | 1000µV | Current - Supply: | 1mA | ||
Current - Output / Channel: | 10.5mA | Voltage - Supply, Single/Dual (±): | 4.5 V ~ 33 V, ±2.25 V ~ 16.5 V | ||
Operating Temperature: | -40°C ~ 125°C | Mounting Type: | Surface Mount | ||
Package / Case: | 8-SOIC (0.154", 3.90mm Width) | Supplier Device Package: | 8-SO |
The OP292GS is designed as one kind of low cost general purpose dual and quad operational amplifiers designed for single supply applications and are ideal for +5V supply. Typical applications include disk drives, mobile phones, servo controls, modem and fax machines, pagers, power supply monitors and controls and battery operated instrumentation.
OP292GS has nine features. (1)Single supply operation 4.5V to 33V. (2)Input common mode includes ground. (3)Output swing to ground. (4)High slew rate 3V/us. (5)High gain bandwidth 4MHz. (6)Low input offset voltage. (7)High open-loop gain. (8)No phase inversion. (9)Low cost. Those are all the main features.
Some absolute maximum ratings of OP292GS have been concluded into several points as follow. (1)Its supply voltage would be +33V. (2)Its input voltage would be from -15V to +14V. (3)Its output short-circuit duration would be unlimited. (4)Its storage temperature range would be from -65°C to 150°C. (5)Its operating temperature range would be from -40°C to 125°C. (6)Its junction temperature range would be from -65°C to 125°C. (7)Its lead temperature range soldering 60 seconds would be 300°C. It should be noted that stresses above those listed in absolute maximum ratings may cause permanent damage to device.
Also some electrical characteristics of OP292GS at Vs=+5V are concluded as follow. (1)Its offset voltage would be typ 0.1mV and max 0.8mV. (2)Its input bias current would be typ 0.75uA and max 2.5uA. (3)Its input offset current would be typ 100nA and max 700nA. (4)Its input voltage range would be min 0V and max 4.0V. (5)Its common mode rejection ratio would be min 75dB and typ 95dB. (6)Its large signal voltage gain would be min 25V/mV and typ 200V/mV. (7)Its offset voltage drift would be yp 2uV/°C and max 10uV/°C. (8)Its bias current drift would be typ 6pA/°C. (9)Its offset current drift would be typ 1.5pA/°C. And so on. If you have any question or suggestion or want to know more information please contact us for details. Thank you!
Technical/Catalog Information | OP292GS |
Vendor | Analog Devices Inc |
Category | Integrated Circuits (ICs) |
Packaging | Tube |
Amplifier Type | General Purpose |
Number of Circuits | 2 - Dual |
Package / Case | 8-SOIC (3.9mm Width) |
Slew Rate | 4 V/s |
Gain Bandwidth Product | 4MHz |
Current - Supply | 1mA |
Current - Output / Channel | 10.5mA |
Voltage - Supply, Single/Dual (±) | 4.5 V ~ 33 V, ±2.25 V ~ 16.5 V |
Output Type | - |
-3db Bandwidth | - |
Current - Input Bias | 375nA |
Operating Temperature | -40°C ~ 125°C |
Voltage - Input Offset | 1000V |
Drawing Number | * |
RoHS Status | RoHS Non-Compliant |
Other Names | OP292GS OP292GS |