OP250

Radiant Intensity :
Maximum Operating Temperature : + 85 C
Packaging : Reel
Minimum Operating Temperature : - 25 C
Wavelength : 890 nm
Beam Angle : 100 deg
Package / Case : 1206


Features:

Single-Supply Operation: 2.7 V to 6 V
High Output Current: 6100 mA
Low Supply Current: 800 mA/Amp
Wide Bandwidth: 1 MHz
Slew Rate: 2.2 V/s
No Phase Reversal
Low Input Currents
Unity Gain Stable


Pinout




Specifications

ABSOLUTE MAXIMUM RATINGS1,
Supply Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .+6 V
Input Voltage2 . . . . . . . . . . . . . . . . . . . . . . . . . . GND to VS
Common-Mode Input Voltage . . . . . . . . . . . . . . . . . . . ±6 V
Output Short-Circuit
Duration to GND . . . . . . . . . . . . . Observe Derating Curves
ESD Susceptibility . . . . . . . . . . . . . . . . . . . . . . . . . . 2000 V
Storage Temperature Range
S, RU Package . . . . . . . . . . . . . . . . . . . . . 265°C to +150°C
Operating Temperature Range
OP250G/OP450G . . . . . . . . . . . . . . . . . . 240°C to +125°C
Junction Temperature Range
S, RU Package . . . . . . . . . . . . . . . . . . . . .265°C to +150°C
Lead Temperature Range (Soldering, 60 sec) . . . . +300°C


Description

The OP250 and OP450 are dual and quad CMOS single-supply,amplifiers featuring rail-to-rail inputs and outputs. Both are guaranteed to operate from a +2.7 V to +5 V single supply.

These amplifiers OP250 and OP450 have very low input bias currents. Outputs are capable of driving 100 mA loads and are stable with capacitive loads. Supply current is less than 1 mA per amplifier.

Applications for these amplifiers OP250 and OP450 include portable medical equipment, safety and security, and interface to transducers
with high output impedance.

The ability to swing rail-to-rail at both the input and output enables designers to build multistage filters in single-supply systems and maintain high signal-to-noise ratios. The OP250 and OP450 are specified over the extended industrial (40°C to +125°C) temperature range.

The OP250, dual, is available in 8-lead TSSOP and SO surface mount packages. The OP450, quad, is available in 14-lead thin shrink small outline (TSSOP) and narrow 14-lead SO packages.


Parameters:

Technical/Catalog Information	OP250
Vendor	TT Electronics/Optek Technology (VA)
Category	Optoelectronics
Voltage - Forward (Vf) Typ	1.5V
Current - DC Forward (If)	50mA
Wavelength	890nm
Viewing Angle	100°
Radiant Intensity (Ie) Min @ If	-
Mounting Type	Surface Mount
Package / Case	1206 Dome Lens
Orientation	Top View
Packaging	Cut Tape (CT)
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	OP250 OP250 365 1148 1 ND 36511481ND 365-1148-1