OP-17EZ

The OP-17EZ belongs to PMI JFET-input series of devices which offer clear advantage over industry-generic devices and are superior in both co and performance to many dielectrically-isolated and hybrid op amps. And the OP-15 provides an excellent combination of high speed and low input offset voltage. In addition, the OP-15 offers the speed of the 156A op amp with the power dissipation of a 155A. The combination of a low input offset voltage of 500iM slew rate of 13W;.ts, and settling time of 1200ns to 0.1% makes the OP-15 an op amp of both precision and speed. These devices were designed to provide real precision performance along with high speed. Although they can be nulled, the design objective was to provide low offset-voltage without nulling. Systems generally become more cost effective as the number of trim circuits is decreased. All devices offer offset voltages as low a 0.5mV with TCVOS guaranteed to A unique input bias cancellation circuit reduces the Is by a factor of 10 over conventional designs. In addition, PMI specifies lgand loswith the devices warmed up and operating at 25°C ambient. PMI achieves this performance by use of an improved Bipolar compatible FET process coupled with on-chip, zener-zap offset trimming. The additional features of low supply current coupled with an input bias current of 9nA at 125°C ambient (not junction) temperature makes the OP-15 ideal for a wide range of applications. The OP-16 features a slew rate of 25V/ps and a settling time of 900ns to 0.1% which represents a significant improvement in speed over the 156. Also, the OP-16 has all the DC features of the OP-15. The OP-17 has a slew rate of 60V/ps and is the best choice for applications requiring high closed-loop gain with high speed. See the OP-42 data sheet for unity gain applications and the OP-215 data sheet for a dual configuration of the OP-15.

The features of OP-17EZ can be summarized as (1)significant performance advantages over LF155, 156 and 157 devices; (2)low input offset voltage 500V Max; (3)low input offset voltage dritt 2.0V/°C; (4)minimum slew rate guaranteed on all models; (5)temperature-compensated input blas currents; (6)guaranteed input bias current @ 125°C; (7)blas current specifled warmed up over temperature; (8)lntenal compensation; (9)low input noise current 0.01 pA/\/Hz; (10)high common-mode rejection ratio 100dB; (11)models with MIL-STD-083 processing available; (12)125°C temperature tested DICE; (13)highest slew rate 60V/s; (14)fastest settling to ±0.1%: 600ns; (15)highest gain bandwidth product (Avcl = 5 Min) 30MHz; (16)available in die form:

The absolute maximum ratings of OP-17EZ are (1)supply voltage all devices except C. (Packaged) & GR grades: ±22V; (2)C, (Packaged) & GR grades: ±18V; (3)operating temperature A, B, & Grades -55°C to +125°C, E & Grades 0°C to +70°C, Grade -40°C to +85°C; (4)maximum junction temperature: +150°C; (5)DICE junction temperature (TI): -65°C to 150°C; (6)differential input voltage all devices except G. (Packaged) & GR Grades: ±40V; (7)C, (Packaged) & GR Grades: ±30V; (8)input voltage (Note 2) All Devices Except C, (Packaged) & GR Grades: ±20V C, (Packaged) & GR Grades: ±16V; (9)input voltage: 20v; (10)output short-circuit duration indetinite; (11)storage temperature range: -65°C to +150°C; (12)lead temperature range (Soldering, 60 sec): +300°C: