Features: · Multi-Rate Operation from 155 Mbps up to 4.25Gbps· 89 mW Power Consumption · Input Offset Cancellation· High Input Dynamic Range · Output Disable· CML Data Outputs · Receive Signal Strength Indicator (RSSI)· Loss of Signal Detection· Polarity Select · Single 3.3-V Supply· Surface Mount...
ONET4201PA: Features: · Multi-Rate Operation from 155 Mbps up to 4.25Gbps· 89 mW Power Consumption · Input Offset Cancellation· High Input Dynamic Range · Output Disable· CML Data Outputs · Receive Signal Stren...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
VCC | Supply voltage (2) |
0.3 V to 4.0 V |
VDIN+,VDIN- | Voltage at DIN+,DIN(2) |
- 0.5 V to 4.0 V |
VTH,VDISABLE,VLOS,VOUTPOL, VDOUT+,VDOUT,VRSSI, VCOC1,VCOC2 |
Voltage at TH,DISABLE,LOS,OUTPOL,DOUT+, DOUT-,RSSI,COC1,COC2 (2) |
0.3 V to 4.0 V |
VCOC,DIFF | Differential voltage between COC1 and COC2 |
±1 V |
VDIN,DIFF | Differential voltage between DIN+ and DIN |
±2.5 V |
ILOS | Current into LOS |
-1 to 9 mA |
IDIN+,IDIN,IDOUT+,IDOUT | Continuous current at inputs and outputs |
25 mA to 25 mAV |
ESD | ESD rating at all pins |
2 kV (HBM) |
TJ(max) | Maximum junction temperature |
125°C |
TSTG | Storage temperature range |
65 to 85°C |
TA | Characterized free-air operating temperature range |
40 to 85°C |
TLEAD | Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds |
260°C |
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values are with respect to network ground terminal.
The ONET4201PA is a versatile high-speed, 3.3-V limiting amplifier for multiple fiber optic applications with data rates up to 4.25 Gbps.
This device ONET4201PA provides a gain of about 50 dB, which ensures a fully differential output swing for input signals as low as 3 mVp-p.
The high input signal dynamic range ensures low jitter output signals even when overdriven with input signal swings as high as 1200 mVp-p.
The ONET4201PA provides a loss of signal detection as well as a received signal strength indicator.
The ONET4201PA part is available in a small footprint 3-mm*3-mm 16-pin QFN package and is pin-compatible with the ONET2501PA and ONET3301PA.
This power efficient limiting amplifier ONET4201PA typically dissipates less than 89 mW and it is characterized for operation from 40°C to 85°C.